Do You Still Carry the Bargman 47-84-610 LED Surface Mount, What Would be a Good Replacement?

Question

Question:

Hello- I want to know if you still stock the Bargman 47-84-610 LED Surface Mount tail lights? I want to replace my Bargman series 92 with the LED Bargmans. Thank you!

asked by: Carlos N

0

Expert Reply:

Hello Carlos,

I am sorry, but the Bargman 47-84-610 LED is no longer available.

The closest options we have to the Bargman 47-84-610 LED would be the LED Trailer Tail Light w/ Reflector, 4 Function, Weatherproof, 76 Diodes, Clear/Red Lens # DG52721PB, or the LED Trailer Light w/ Reflector, Brake, Tail, Turn, Surface Mount, Rectangular, Red # DG52720PB. The mounting holes on both of these lights are a little wider than the Bargman you mentioned. They are 10 1/2" apart. I attached an image for reference.

According to Bargman, they do not make any direct drop-in LED equivalents to their 92 Series that would let you reuse the same mounting points.

expert reply by: Kate F

0

Diamond LED Light Dimensions
(click to enlarge)

Kate F.

12/29/2025

Hey Carlos, did one of those LED trailer tail lights end up working as a good replacement for your Bargman 92 lights? Knowing what fit best could really help others looking to upgrade their setup too.

Carlos N.

12/29/2025

@KateF Hey Kate. I ended up using an LED taillight set made by Limicar. I wanted something that incorporated a license plate light. The Limicar uses 24 LED red diodes per light and 5 white diodes for the license plate light, for a total of 53 diodes. They also match 2 of the 4 Bargman mounting holes. I didn’t want to drill 4 new holes in the trailer, so this set was a compromise. So far, they work well.

Kate F.

12/30/2025

@CarlosN Thanks for the response Carlos. I will need to look into that manufacturer to see if it would be something we could add to the site. I am glad you were able to find something that better suited your needs without needing to drill more holes. May 2026 bring you your greatest adventures yet!

Answer 1

Hey Dave, I am sure we have an outdoor faucet replacement that would work great on your 2024 Airstream Globetrotter but I don't have a way to look up exactly what your RV came with. In general all RVs have one of two designs. One like the part…

view full answer...

Answer 2

Hello again John; when First Brands took over as the parent company for Bargman they discontinued most of their lights. That includes the direct replacement for the 30-91-010 and 30-91-011. Typically we recommend the the Peterson Trailer Tail Light…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 11

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Do You Still Carry the Bargman 47-84-610 LED Surface Mount, What Would be a Good Replacement?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching