Need New Drums, Brakes And Bearings For AL-KO 7K Torsion Axle Stamped AL-KO 8480
Updated 11/24/2025 | Published 11/20/2025
Products Featured in This Question
Question:
Need new drums, shoes, bearings and other brake components to rebuild brakes on a 7K torsion axle. Drum is stamped AL-KO 8480. MAX Dia 12.090
asked by: Daniel C
Expert Reply:
Hello Daniel, thanks for reaching out. We do have the drums, brakes and bearings for the 7K torsion axles. Here is what I recommend:
- Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles - 12" - 8 on 6.5 - Pre-Greased # AKHD-865-7-2-EZ-K
- etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K # AKEBRK-7-SA
- Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal # BK3-200
There are a few things you should check to verify fitment. Please make sure your brakes and axles use a 5-bolt brake flange, as some older AL-KO axles did not. Also please verify the 8 on 6-1/2" bolt pattern matches your wheels. If you can check those two things, you can be sure the parts I recommended will work.
Keep in mind the brakes are sold as a pair, and the hubs are sold individually. The hubs come with bearings, races, grease seals, grease cap and lug nuts.
What kind of trailer is this going on?
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- 25580 / 14125A
- Standard Grade
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: trailer hubs and drums
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles - 12" - 8 on 6.5 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Video: Review of etrailer Trailer Brakes - Electric Drum Brake Kit - AKEBRK-6
- Video: Let’s Check Out the Easy Grease Trailer Hub and Drum Assembly for 5.2K
- Video: Review of the Easy Grease Trailer Hub and Drum Assembly for 5.2K
- Shop: Easy Grease Trailer Hub and Drum for 5.2K to 7K Axles - 12" - 8 on 6-1/2 - Galvanized
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Search Results: 7000 lbs axle trailer bearings races seals caps
- Q&A: Hollywood Racks RV Rider Bike Handlebar Clearance
- Q&A: Do I Have to Use Timken Races with Timken Bearings, or can I Use Mine that were Made in China?
- Q&A: 2015 Palomino Sabre 36QBOK Brakes and Bearing Recommendation
- Q&A: Bearing Kit For Curt/Lippert 7,000 lb Trailer Axle
- Q&A: Picking Out Replacement Bearing Kit for Lippert 7k Axle
- Q&A: Looking For Hubs, Bearings and Brakes For Lippert 7K Axle
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Hitch
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Suspension Enhancement
- Search Results: trailer wiring
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
on Trailer Hubs and Drums
Daniel C.
11/21/2025
It goes on a 2011 WW stock trailer with triple 7k axles.