Do Enclosed Trailer Transition Plates Come With Hardware? What Bolts Do I Use?

Question

Question:

Do these come with hardware or do I need to get my own bolts?

asked by: Corey

0

Expert Reply:

Hey Corey, good catch - hardware isn’t included with either the # M368FR steel or # M348FR aluminum plates. Most folks just source stainless or zinc-coated hardware locally so they can match what’s already on their ramp. It also depends on the style and thickness of the ramp, so that's why hardware isn't always going to be universal. Pre-drilled holes are already there, so install’s pretty quick once you line it up. I'd use a standard cordless drill or impact which would zip the screws in and be done in 5 min.

Do you know if you’re mounting it to wood or metal? I can help you pick the right bolt/screw type.

expert reply by: Andrew N

0

aluminum plate
(click to enlarge)

black powder coated plate
(click to enlarge)

Corey

11/26/2025

It’s a steel ramp, 1/8" or 3/16" thick plate. Probably through-bolts then?

Andrew N.

11/26/2025

@Corey Yep exactly, Corey. Go with some stainless through-bolts and locknuts underneath. Let me know how it looks after!

Sam

11/26/2025

@Corey I used self-tapping screws on my aluminum ramp and they’ve held fine for a year.

Corey

11/26/2025

@Sam Oh cool! I probably won't do that on mine since it's a little different setup on steel ramp.

Answer 1

Hey there Mike; both M-3 plates are built heavy duty, but they don't really have a weight rating. They use a 3/16 inch thick tread plate and come in steel #M386FR or aluminum #M348FR, fully welded with a piano hinge. They’ll take the full load of…

view full answer...

Answer 2

Good question, Patrick - both do the same job, but here are some differences for you to look at. The #M368FR steel is heavier at 40 lbs and better for constant heavy loads like pallet jacks or commercial carts. The #M348FR aluminum is lighter at 23…

view full answer...

Answer 3

Hey Alan - you can absolutely use the M3 plate at the door-to-floor gap. Many folks run one on the outside edge and another inside for a totally smooth roll-through. The steel plate #M368FR gives you extra strength if you’re using pallet jacks or…

view full answer...

Answer 4

Hey Brandon! Yes, either M-3 transition plate (steel #M368FR or aluminum #M348FR) will do the job, but I’d go aluminum #M348FR since it’s easier to trim and won’t rust if water gets in that recessed area. Just mount it across the lower edge of the…

view full answer...

Answer 5

Great idea, Leo - we don’t package the M-3 plates as a set, but you can just grab two of whichever version you prefer. Many folks use the steel plate #M368FR for the exterior edge where it takes more impact and the aluminum plate #M348FR for the…

view full answer...

Answer 6

Hey Jeff! Yes, the M-3 steel plate #M368FR is perfect for that setup. It’s about 81-3/4 inch wide, so it’ll span your ramp nicely, and the welded steel with a tread-plate texture gives great traction even if your wheels are wet or muddy. You’ll just…

view full answer...

Answer 7

Hey Jack, If you're talking about a transition plate then you'll want the etrailer Enclosed Trailer Transition Plate #e32JR. This can be installed on either end of the ramp to help make the transition onto easier or at the hinge of the ramp…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Do Enclosed Trailer Transition Plates Come With Hardware? What Bolts Do I Use?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching