Video Transcript for Review of Caliber Snowmobile Trailer Parts - Transition Plates - CA62TJ

Hello, everybody. Steven here with etrailer.com. We're taking a look together at our Caliber Edge Glide 2.0 transition plate for enclosed trailers. Now folks, this comes in three two-foot long sections, giving you a total of six feet or 72 inches long, 12 inches wide, and about a quarter inch thick or tall. Now, here's an image of what this looks like. Potentially when it's installed.

It's gonna cover that gap between your enclosed trailer door. That little gap, maybe a couple inches, is normally, I would say maybe a couple more. And it's gonna fold up whenever you fold your door back up. But it's gonna give you a smooth transition from the ground onto the ramps of the trailer. So when it's like this, and then when your door swings up, it's gonna go right to this position.

And then when you fold your trailer down, trailer door down, you can just either back up or drive straight through and out, knocking these back down to cover that transition. Or if you wanna put these at the end of the ramp, you can do that and have a little transition from the ground up onto the ramp. So the possibilities are totally up to you. It's gonna include traction knobs so you can safely walk on them. They've got built in trim lines.

So if you need to trim these, you can make straight cuts, right where they've got the trim lines. While we've got you zoomed in here, I'll show you the bottom side. And again, it just pivots up. And then you've got a couple of these blocks included all the hardware to mount it, packet of screws with the star head, and then a couple of these plastic, I don't know what you call 'em, push pins, to fill in any kinda holes that you don't use and those kind of things. So again, very simple to install and let you close that trailer door without having to disassemble anything.

So very nice product here from Caliber, the Edge Glide 2.0. I'm Steven, thanks so much for watching, have a good day.