Solution for Needing Replacement Piece from Yakima BaseLine Tower

Question

Question:

Hello. Is the mating piece that the bolt threads into also available? It’s the silver piece that moves up and down as the bolt is adjusted and actually engages with the base clip.

asked by: Johnny

0

Expert Reply:

I just checked with Yakima and they do not have that available as a replacement part. In a situation like this only solution would be to replace the tower which for that you'd need the part # 8880618. Did your break or did you lose that part?

expert reply by: Jameson C

0

Jameson C.

12/8/2025

Hey, were you able to replace the tower for your Yakima crossbars? Knowing what you ended up doing could help others who lose or break that same piece.

Answer 1

The correct replacement cover/door for the Yakima Baseline tower is the part #8880620.

view full answer...

Answer 2

To install your existing Yakima JetStream Crossbars like the 60" #Y00426 (which is the length recommended for your truck) on your 2012 Ford F-150 SuperCrew you will need the BaseLine Towers #Y28TR and the BaseClip Fit Kit #Y06168. It looks like…

view full answer...

Answer 3

Yes, we do carry the Replacement Swing Adjustment Bolts #Y35VJ for Yakima BaseLine towers.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

The best replacement option we offer for a Atwood GC10A-4E Water Heater is tankless, the Furrion RV Tankless Water Heater part #FR68SR. It won't be a direct replacement but still pretty easy nonetheless as they are very similar. That said, you…

view full answer...

Answer 10

Hey David, thanks for reaching out. Yes, the Curt Trailer Hitch Receiver #C82RJ will indeed fit the 2027 Kia Telluride. This hitch is still in the pre-order phase, but it is being going to fit both the 2026 and 2027 Telluride. Right now, we are…

view full answer...

Answer 11

Hey Bryan, congrats on your new SUV. As of (05/13/26) the Curt Hitch item #C82RJ and the Curt 4-Way connector item #C34MJ are the only parts we know of that are going to be coming out for the new 2027 Kia Tellurides. It's super early in the year…

view full answer...

Answer 12

The Malone EcoLight Sport Trailers like item #MAL43FR have 8" tires with a 5 on 4-1/2 lug pattern. The Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel item #AM3H490 would work as a replacement but you will most likely have to…

view full answer...

Solution for Needing Replacement Piece from Yakima BaseLine Tower

Product Page this Question was Asked From

Continue Researching