Stealth/Hidden Trailer Hitch For A 2026 Kia Sportage X-Pro Prestige Gas Model

Question

Question:

Does this hitch fit non-hybrid models? And if not, can you recommend a different stealth hitch for 2026 Sportage X-Pro Prestige gas?

asked by: Eugene

0

Expert Reply:

Hi Eugene!

I did a bunch of digging and it looks like the EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - 2" # EH82KR is only listed to fit the Hybrid options for the 2026 Kia Sportage line. We do have other options, though not hidden, that are listed to fit your X-Pro Prestige gas model though, and I have the one I recommend for that listed below:

etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e38KR

The matte black finish on this hitch will allow it to blend into the vehicle significantly better than glossy options, making it look more factory. It is also American made, which is a big plus in my book. It is a fully fixed option though, so it will always be visible.

Now with all that being said, the etrailer hitch (as well as all the others we have for your vehicle other than the EcoHitch) will fit both Hybrid and gas options. The EcoHitch does have a slightly different design than the other hitch options, but not significantly. There is a chance it will fit your gas model, but I can't guaranty it. If you are willing to try and then let me know how it goes, I would be very appreciative and would also cover all the return costs if it doesn't work. Do watch the included install video to make sure you are willing to go this route though. The install will be much the same as the EcoHitch.

Also, what are you wanting to use the hitch for?

expert reply by: Lazer S

0

etrailer Hitch e38KR Kia Sportage
(click to enlarge)

Eugene

11/20/2025

Hi Lazer, Thank you for your reply. I have plenty of experience wrenching around cars, and since you have graciously offered the free return in case it does not fit, I am willing to give it a go. I will mainly be using it for a bike rack, but I might tow a small trailer as well at some point. I will go ahead and order it, and will report here.

Lazer S.

11/20/2025

@Eugene Awesome! Definitely let me know how it goes, and good luck! : )

Eugene

11/25/2025

@LazerS As promised, here's the report. In short, I made it fit. Long explanation below: There are 3 threaded holes in each of the 2 rails the hitch attaches to, designed for the OEM hitch. These holes lined up perfectly with the EcoHitch Stealth Trailer Hitch's holes. However, this hitch, I guess due to being higher load rating than OEM, uses an extra attachment point, for which it requires you to place a rectangular plate and a bolt into a 1" cutout in the rail, further towards the front of the car. I am not sure if the position of this hole is different in the hybrid, or if this is new to 2026, but now that holes is ~1.5" closer to the back of the car, and the hole in the hitch does not line up. I went ahead and drilled a new hole in the right spot, after which point the installation was straightforward and successful. I will post this as a review as well, and will attach pictures there.

Lazer S.

11/26/2025

@Eugene Thanks for getting back to me! Glad to hear it's installed and ready to go! Bummer you had to drill a new hole, but at least that was all that was needed and it didn't need to be returned. Sometimes things just workout with a little bit of work. : ) Let me know if there is anything else I can help with and have fun with your new hitch!

Answer 1

Yes, they do John. To add a hitch to your 2026 Kia Sportage hybrid, I recommend the Curt item #C94WR. This hitch is custom fit and bolts to your Kia with included hardware. This is a class III hitch with a 2" receiver. It's going to give you…

view full answer...

Answer 2

Hey Darren, thanks for reaching out. Yes, we actually have several hitches for the 2026 Hyundai Tucson Hybrid N-Line. Here are all the available options: - Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C94WR - Trailer Mate Trailer…

view full answer...

Answer 3

Yes, it will Amanda and congrats on the new SUV. The Curt Trailer Hitch item #C94WR has been confirmed to fit all models of the 2026 Kia Sportage including your hybrid. The Curt item #C94WR is a class III hitch with a 2" receiver. It is custom…

view full answer...

Answer 4

Congrats on the new SUV Thomas. When installed on a 2026 Kia Sportage, the hitch pin on our etrailer item #e38KR hitch sits 6" back from the far edge of the rear bumper. The bottom part of the 2" receiver sits 11-1/2" above the ground.…

view full answer...

Answer 5

Hi James, We installed the Curt Trailer Hitch Receiver part #C94WR on a 2026 Hyundai Tucson and in the video, they take some measurements of the hitch on the vehicle. It looks like from the ground to the top of the inside of the hitch measures about…

view full answer...

Answer 6

The first thing you would have to do is remove the bars. This can be done by using a 5mm Allen wrench and unscrewing the bolt underneath each foot. Then you would remove the legs from the base. I would use some lube on the locking levers just in case…

view full answer...

Answer 7

Hey Mitchell, thanks for reaching out! The hitches in our fit system, like the EcoHitch Stealth #EH82KR you're looking at, are made for the US models of vehicles. It could potentially fit one made in Slovakia, but I honestly don't have a way…

view full answer...

Answer 8

Both the Curt #C13382 and the etrailer #e98912 hitch are a 2" Class III hitch receiver that will provide a maximum gross trailer weight of 3,500 lbs and a maximum tongue weight of 525 lbs. You are correct, they are an identical hitch but our…

view full answer...

Answer 9

Exactly! Both hitches are very similar in design and construction. That is usually what happens when hitches are custom-fit for your vehicle. The main difference is the finish. I personally prefer the matte finish that #e98839 has. We have them on…

view full answer...

Answer 10

Hello Ted; the difference between the Curt #C13397 and the etrailer #e98848 is the finish. The Curt has a standard glossy finish while the etrailer features a unique matte black finish. Outside of this the two hitches are identical. I prefer the…

view full answer...

Answer 11

The Curt 2" Trailer Hitch Receiver #C13315 is an excellent option for your 2019 Mazda CX-5 and really the only other option available that I would recommend above it is the etrailer.com 2" Trailer Hitch #e98902, and that is only due to the…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Stealth/Hidden Trailer Hitch For A 2026 Kia Sportage X-Pro Prestige Gas Model

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching