Looking For Axle, Leaf Springs And Hubs For Boat Trailer
Updated 10/31/2025 | Published 10/10/2025
Products Featured in This Question
Question:
I am looking for a boat trailer axel set-up. I will need the springs, axels and 5 lug hubs. Inside frame of my trailer is 41 inches and cant seem to find a replacement. I hope you can help
asked by: Michael
Expert Reply:
Hello Michael, thanks for reaching out. We may have springs and hubs for you, but looking thru the axles we carry we do not carry a leaf spring axle that would line up with a 41" wide frame. The closest we have would be the CE Smith 1.8K axle # CE33201GA-HUB which is for a 46.5" spring center.
As far as the axles and hubs, I would need to know the weight capacity if your axle, as well as the eye-to-eye length of the current springs. The best thing to do is jack up one side of the trailer so you can measure the springs without a load.
For the hubs I would need to know the axle capacity and bearing sizing. This will of course be dependent on what axle you get. For example, the Easy Grease Trailer Hub and Drum Assembly # AKHD-545-35-EZ-K is for a standard 3,500 lb axle. It has a 10" drum and uses the # L68149 (1.378" inner diameter) inner bearing and # L44649 (1.063" inner diameter) outer bearing.
I know we can't provide the axle, but if you can provide me with the specs for your springs and hubs I am happy to look into it and see if we have anything for you.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Continue Researching
- Q&A: Difference Between an Idler Hub and a Hub/Drum
- Article: Trailer Wiring Diagrams
- Q&A: Difference Between Timbren Axless Suspension Systems T54KV and T99GR
- Q&A: Recommended 2,000 lbs Axle w/ Idle Hubs That Have a 5 on 4-1/2 Bolt
- Q&A: Measurement of Hole Spacing on Torflex Lift Kit # K71-725-02
- Q&A: Bolt Hole Measurements On BTR E-Z Lube Spindle Brake Flange
- Q&A: Best Trailer Hitch For 1993 Chevy C1500 Short Bed
- Q&A: Recommended Lock for MORryde GooseTech 5th Wheel to Gooseneck Pin Box
- Article: Trailer Tire Sizing
- Article: Where to Position the Trailer Axle?
- Article: Trailer Lighting Requirements
- Article: How to Raise Your Travel Trailer Height
- Article: Anti-Rattle Devices
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
Jesse M.
10/30/2025
Hey Michael, were you able to get the measurements for your trailer springs and hubs? Once you have those specs, I can help narrow down what will fit best. Let me know what you find so we can get you closer to the right setup.