Looking for Replacement Door Latch/Lock for 2021 Cynergy Cargo Trailer

Question

Question:

I have a 2021 Cynergy cargo trailer and I’m need the handle/lock mechanism for the side door. The opening is 3.5” wide and 4.5” tall. Would you have one to fit this opening? Thanks much!

asked by: Donnie E

0

Expert Reply:

Hey Donnie, the closest fitting option we have would be the Full Size Locking Steel Latch # L3980 which was designed to fit cut out dimensions of 3-3/8" x 4-5/8". This would be close enough to what you have to work.

expert reply by: Jameson C

0

Donnie E.

10/8/2025

Can you give me a link to where to purchase this part or refer me in the right direction? Thank you.

Jameson C.

10/8/2025

@DonnieE You can click the text for the # L3980 right here and it will take you to the product page where you can order it.

Answer 1

The Atwood AMPlock Trailer Coupler Latch Lock referenced in your question is really designed for trailer couplers to help deter theft of the trailer itself. It secures the trigger latch on the coupler so it cannot be removed from the tow vehicle or…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Looking for Replacement Door Latch/Lock for 2021 Cynergy Cargo Trailer

Product Page this Question was Asked From

Continue Researching