Will Correct Track Fit Forest River Sandpiper 4002FB

Question

Question:

Will with work with a Forest River Sandpiper 4002FB? Attaching a picture of the axels. gvwr is 15050

asked by: Matt S

0

Tandem Axles
(click to enlarge)

Expert Reply:

Hey Matt! Yes, the Correct Track Trailer Alignment and Lift Kit # RR55QX will fit your Forest River Sandpiper 4002FB. These work with any standard hangers like yours, extending them to achieve a lift. The kit I linked here is actually the triple axle kit, but it is the one you need to raise each set of hangers equally.

Are you looking for more clearance or are you nose high trying to level out your 5th wheel?

expert reply by: Robin H

0

Matt S.

10/2/2025

The trailer has a very long tail behind the wheels since it is such a long trailer (43 feet). I am having a problem where the back has dragged a few time, so I am looking to raise the height to eliminate that problem.

Robin H.

10/2/2025

@MattS ah yeah, that's not good. This will work to fix that too!

Matt S.

10/2/2025

@RobinH Do i need just one of this kit to get the full 2-1/4 on the tandem axle. I saw in the description it said you needed 2 of them, but I assume that is for a triple axle.

Robin H.

10/2/2025

@MattS just one of the # RR55QX. The descriptions get really confusing, I wish they were better. If you got the tandem axle kit you would also need to add a single axle kit for the full lift. I don't know why you wouldn't raise all the hangers equally to begin with. The tandem and single kit together cost significantly more than the triple axle kit which has the same components.

Answer 1

Yes, they have Dan. The alternative to the Lippert Correct Track is the Correct Track Trailer Alignment and Lift Kit item #RR23QX and item #RR55QX. These kits include brackets that attach to the spring hangers and lower the attachment point for your…

view full answer...

Answer 2

Hey Richard, great question. To get the full 2-1/4" lift on a tandem axle setup, you actually need the triple axle kit part #RR55QX instead of the #RR23QX tandem axle kit. You could also achieve this by getting the tandem axle kit, and an…

view full answer...

Answer 3

Hello Brian, thanks for reaching out. As far as I know, the Correct Track kit has not been discontinued. We still carry them and stock them here. As of right now we have not heard anything from the vendor that would indicate they are being…

view full answer...

Answer 4

In regards to the Correct Track Trailer Alignment and Lift Kit part #RR23QX, the kit provides a lift by essentially extending the hangers. This normally requires cutting off the old hangers and welding on new, taller ones but with this kit you…

view full answer...

Answer 5

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 6

Nothing at all. The Grease Seal item #58846 is a different part number for the 10-19 grease seal. It has a inner diameter of 1.719" and outer diameter of 2.565". This seal is primarily used in 3,500 lbs axles. What kind of trailer do you…

view full answer...

Answer 7

Hey Steve! Are your axles overslung or underslung? If they're running under the axle you can use an axle flip kit to lift the trailer. If they're already on top of the axle the only option we have is the Correct Track #RR55QX. This kit will…

view full answer...

Answer 8

Yes it will. The Correct Track Trailer Alignment and Lift Kit item #RR55QX is compatible with the Equa-Flex System. It will give you a lift of either 1-1/4" or 2-1/4".

view full answer...

Answer 9

According to my research your 5th wheel should have 5,200 lb tandem axles so you need leaf springs with at least that high of a weight rating. I'm attaching a link to our selection of leaf springs for you to filter through - if you can give me…

view full answer...

Answer 10

The Lippert tandem axle lift kit part #RR23QX does not work with your MORryde CRE3000 suspension kit #MR87ZR.

view full answer...

Answer 11

The Tandem Axle Lift Kit #RR23QX does have the weight capacity needed for your Montana trailer and will give you 2-1/4 inches of lift like you are looking for. I attached a link to this page that has the install instructions for you to check out as…

view full answer...

Answer 12

That is a great question. I contacted the manufacturer for verification, they stated the Tandem Axle Lift Kit #RR23QX is rated to use with up to 8,000 lb. axles, so the tandem can handle up to a 16K trailer weight.

view full answer...

Will Correct Track Fit Forest River Sandpiper 4002FB

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching