Availability of Lift Kit for Nose High 5th Wheel Trailer
Updated 09/16/2025 | Published 09/07/2025
Products Featured in This Question
Question:
I am about 5 3/4 nose high and need this bed rail to trailer clearance. I was thinking I can lift the trailer 2-3” MORyde suspension with lift blocks . Can you tell me which blocks to purchase? I am also looking to replace the tires and rims with the etrailer item below. Goodyear Endurance ST225/75R15 Radial Tire w/ 15 Eagle Aluminum Wheel - 6 on 5-1/2 - LR E I believe this will fit as well Thanks, Steve
asked by: Steve P
Expert Reply:
Hey Steve! Are your axles overslung or underslung? If they're running under the axle you can use an axle flip kit to lift the trailer. If they're already on top of the axle the only option we have is the Correct Track # RR55QX. This kit will extend your hangers for a 1-1/4" or 2-1/4" lift. I'm guessing you have a tandem axle trailer so this triple axle kit will be required for the full 2-1/4" lift. The only other option would be to cut off your existing hangers and weld on longer ones.
What is your current tire size? If it is already ST225/75R15 and you have a 6 on 5-1/2 bolt pattern then there is no reason the Goodyear Endurance ST225/75R15 Radial Tire w/ 15" Eagle Aluminum Wheel # GY97QB would not fit. If this is a larger tire clearance may be an issue. I would raise the trailer, then measure for clearance to determine if they will fit or not before upgrading to a larger size.
(click to enlarge)
Product Page this Question was Asked From
Correct Track Trailer Alignment and Lift Kit - Tandem Axle
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Tandem Axle
- RV Ride Control
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Will Correct Track Fit Forest River Sandpiper 4002FB
- Shop: Correct Track Trailer Alignment and Lift Kit - Tandem Axle
- Video: Review of RV Ride Control Trailer Suspension Parts - Alignment and Lift Kits - RR55QX
- Shop: Correct Track Trailer Alignment and Lift Kit - Triple Axle
- Shop: MORryde Shock Absorbing Suspension Equalizers for Triple Axle Trailers w/ 33" Wheelbase - 8K
- Q&A: Will the Correct Track Trailer Alignment and Lift Kit Work w/ the Equa-Flex System?
- Q&A: Replacement Leaf Springs and Lift Kit for 2017 Cougar XLite 29RLI
- Q&A: 2 inch Lift Kit for Jayco 5th Wheel with MORryde CRE3000 Cushioned Equalizers
- Q&A: Max Trailer Weight for Tandem Axle Lift Kit
- Q&A: Lift Kit for Montana RV Built on Lippert Chassis
- Q&A: Lift Kit Solution to Allow Fifth Wheel Trailer to Sit More Level When Towed
- Article: How to Raise Your Travel Trailer Height
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Trailer Tire Sizing
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Accurately Measure Trailer Leaf Springs
Steve
9/16/2025
Thanks for the guidance Robin. Looks like Part Number: RR55QX will work with my current suspension. Axles are overslung. With this kit I was looking to upgrade to Goodyear Endurance ST235/80R16 Radial Tire (6 lug).