Replacement Brakes for a 2021 Keystone Alpine Fifth Wheel 3910RK
Updated 09/17/2025 | Published 09/08/2025
Products Featured in This Question
Question:
Good morning. Im looking to purchase 4 electric brake assemblies. Your website doesnt list a Keystone Alpine 3910RK, Which brake assembly can i use for that model? Any help would be greatly appreciated. Thank you
asked by: Randall W
Expert Reply:
Hey, Randall!
I did some digging and I keep getting results showing that your camper should have 7,000 lbs Dexter axles. You would want to make sure just in case. If you're unsure you can check the stamp on the hub for a number, all Dexter hubs will have them. I've also gone ahead and linked a help article that goes over other ways to help ID your axle capacity.
If you do have 7k axles, you can get part # AKEBRK-7-SA for self adjusting brakes or part # AKEBRK-6 for manual adjusting brakes. Let me know what you find about your axle and I can confirm if the 7k brakes will work for you.
(click to enlarge)
Product Page this Question was Asked From
etrailer Rubber Hitch Cover for 2" Trailer Hitches - Qty 1
- Hitch Covers
- Misc Covers
- Plain
- Rubber
- Fits 2 Inch Hitch
- Standard
- Square
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer hubs and drums
- Search Results: trailer axles
- Search Results: wheel bearing grease
- Search Results: trailer brakes
- Search Results: 12 inch trailer brakes
- Search Results: 6000 lbs axle trailer brakes
- Shop: Electric Trailer Brake Assembly for Lippert ABS Hubs - 12" - Left/Right Hand - 5.2K - 7K
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles - 12" Diameter - 6 on 5-1/2
- Shop: etrailer Rust-Resistant Electric Trailer Brakes - Dacromet - 12" - Left/Right Hand - 5.2K to 7K
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure a Trailer Axle
- Video: In-Depth Review of the Trailer Hub and Drum Assembly
- Video: Breaking Down the Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles
- Video: Checking Out the Trailer Hub and Drum Assembly
- Video: Comprehensive Review: Dexter Trailer Hub and Drum Assembly
- Video: etrailer Rust-Resistant Electric Trailer Brakes Feature Review
- Video: Checking Out the etrailer Rust-Resistant Electric Trailer Brakes
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Shop: Trailer Axle Beam with Easy Grease Spindles - 89" Long - 6,000 lbs
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 89" Long - 5,200 lbs
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Q&A: Does Roadmaster Invisibrake System Require Installing Diodes too
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Will The Tekonsha Prodigy P3 Brake Controller Work On A 2023 Jeep Grand Wagoneer Series II Obsidian?
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: What Kodiak Disc Brake Kit will Replace My Brake Set-Up with Slip On Rotor Stamped 46247?
- Q&A: Will Complete Repair Kit for Roadmaster Tow Bars Work With Nighthawk
- Q&A: Is The Curt C96JR Compatible With The Roadmaster Invisibrake RM-8700
- Q&A: Difference Between Curt & etrailer Trailer Hitches For 2024 Subaru Crosstrek Wilderness
on Hitch Covers
Randall W.
9/17/2025
Good morning Gwendolyn. You are correct. I ordered the manual (4) set for the 7k axles, and they worked perfectly. Thank you for your help.