Need Bearing Kit For Dexter 4,400 lb Axle

Updated 09/05/2025 | Published 09/01/2025

Products Featured in This Question

Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle

(2956)

$15.39

Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles

(2754)

$7.43

Replacement Race for L44643 and L44649 Bearings

(1284)

$5.00

Replacement Trailer Hub Bearing - L44649

(2141)

$22.34

Replacement Race for L68149 Bearing

(1284)

$7.69

Replacement Trailer Hub Bearing - L68149

(2141)

$17.06

Question:

Hi, just curious if the kit for the 3500lb Dexter axles also fit the Dexter 4400lb axles? Thanks for any info or pointing me in the right direction! 2015 Heartland NorthTrail 28dbss keeps bringing me back to 3500lb and before I repack the bearings I wanted to have a kit in front of me.

asked by: Bryan T

Dexter 4,400 lb Axle Tag
(click to enlarge)

Expert Reply:

Hello Bryan, thanks for reaching out. Sounds like you are on the right track here. The # BK2-100 bearing kit you were looking at is correct for your Dexter 4,400 lb axle. The 4.4K axles use the same bearings and tube size as the 3,500 lb axle. The kit contains the inner bearing item # L68149, inner race item # L68111, outer bearing item # L44649, outer race item # L44610, grease seal item # 58846, and finally a cotter pin an tang washer.

expert reply by: Jesse M