Suspension Enhancement Kit Recommendation for 2025 Chevy Silverado 3500 Trail Boss

Question

Question:

I have the 2025 Chevy 3500hd 4wd diesel trail boss . It appears this is the right kit for my truck….i use this truck for a bumper pull atv trailer..a 2 horse dbl axel bumper pull and a 3 horse lq goose neck…like the sale price …….thanks for the help

asked by: John C

0

Expert Reply:

Hey John, I do have a suspension enhancement kit that fits your 2025 Chevy Silverado 3500 with the PacBrake kit part # PB56SV but the Timbren kit and everything else we have that is listed for your truck does not fit the Trail Boss models. Would you be okay with an air bag kit?

expert reply by: Jameson C

0

John C.

9/3/2025

Jameson, thanks for the reply. Not sure if I want the air bag maintenance. Like the idea of little or no maintenance of the helper blocks I’ll take a look at the pacbrake . Thanks again

Jameson C.

9/4/2025

@JohnC Yeah I totally get that. I wish we had non-air bag options for the Trail Boss.

Answer 1

Hey Dale. The only Air Lift 7500 XL kit that fits a 2024 Chevrolet Silverado 2500 is the item #AL57541 kit you were looking at. It only fits the 4WD models. Not sure if you have a gooseneck hitch but there are compatibility issues with this kit and…

view full answer...

Answer 2

Hey Jordan, Yep, I went ahead and verified directly with Timbren the Timbren Suspension Enhancement System - Severe Service #TGMRTT35D are indeed a fit for your 2025 Chevy Silverado 2500 ZR2. That said, the Severe Service kit is designed for trucks…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Suspension Enhancement Kit Recommendation for 2025 Chevy Silverado 3500 Trail Boss

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching