Weight Ratings for SwingKing Bolt-On Swing Tongue Kit

Question

Question:

What is weight capacity for 3x4 coupling? How much can be towed?

asked by: Lin

0

Expert Reply:

Hey Lin!

The weight capacity of the SwingKing Bolt-On Swing Tongue Kit # TD33FR varies depending on the length of trailer tongue you decide to go with. If you check out the attached photo you can see the different weight ratings.

Are you just looking to free up some storage space?

expert reply by: Jon G

0

SwingKing Bolt-On Swing Tongue Kit Weight Rating Chart
(click to enlarge)

Lin

8/31/2025

Thanks for your reply . Actually trying to make the trailer longer. Plus with the additional length it should be nice to fold the tongue up Thanks again!

Jon G.

8/31/2025

@Lin You're absolutely welcome!

Answer 1

The lights will need to be replaced, we have some great options for this. The Optronics LED Combination Trailer Tail Lights part #TLL160RK looks to be a great match for your existing taillights and the Custer Trailer LED Clearance Identification…

view full answer...

Answer 2

Hello Jacques, thanks for reaching out. With the SwingKing Bolt-On Swing Tongue Kit #TD28FR, you really should not see much noticeable play once everything is installed and torqued correctly. It is designed to fit a 3" wide tongue, so as long as…

view full answer...

Answer 3

Hey Robrt, thanks for reaching out! Yes, the etrailer Swivel Jack w/ Bolt-On Mounting Plate #e22ZV can be installed on angle iron, but I do recommend beefing up that attachment point a little instead of just running 2 bolts through it and calling it…

view full answer...

Answer 4

Hey Brandon, The specific weigh capacity of this swing away tongue#TD28FR is determined by how long you make it. I have attached the chart breakdown of the different lengths and capacities for the 3 x 3 tongue like #TD28FR. It can range from…

view full answer...

Answer 5

Hi Tyler; we do not have any information on the total length for tongue sections when installing the Fulton Fold-Away Coupler Hinge Kit for 3" x 5" Tongue #FHDPB350101. The only thing Fulton offers is the maximum pivot length and…

view full answer...

Answer 6

Hi Cody! We do have a couple alternatives that will work the same, but the Fulton FHDPB330301 swing away kit is not currently available. It may be at some point in the future, but with their parent company (First Brands) having "issues"…

view full answer...

Answer 7

Hello Randy, Great question. For replacing bunk boards on a 20 ft bass boat trailer (like #CE27845), you’ll want 3/8 inch diameter lag bolts that are 1-1/2 to 2 inches long, depending on the thickness of your bunk brackets. Go with hot-dipped…

view full answer...

Answer 8

Hi John! For the Dexter 9-3/4" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 4,200 lbs #DX82UR, you will need the following parts: Replacement Caliper for Dexter 10" Brakes - Driver's Side #K71-773-01 Replacement Caliper for Dexter…

view full answer...

Answer 9

Hello David, Thanks for writing in! Yes, the #C57003 adapter will fix the issue you’re seeing. Your 2026 GMC Sierra’s trailer light monitoring system is designed to look for a certain level of power draw to confirm the trailer lights are working.…

view full answer...

Answer 10

Hey Michael, thanks for the information! The Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness item #RED98CR comes with everything you'll need for your 2021 Toyota 4Runner. You will not need a Curt adapter. The Redarc item #RED98CR…

view full answer...

Answer 11

The DB-42 is an older style of UFP 3,500 lb axle disc brake components. The Kodiak kits like the part #K2HR35D will fit in replacement of that and would be an upgrade so this would be a great solution. It comes with everything you'd need to…

view full answer...

Answer 12

Our installer here will spray the light with some lubricant around where the light meets the grommet and then will use a screwdriver to pry the light out first, and then the grommet. If you check out the install video I attached you will see this…

view full answer...