Detailed Breakdown of the Yates Y-Style Bow Stop for Boat Trailers Video

The CE Smith Carpeted Bunk Boards for Boat Trailers part #CE27820 are made with untreated lumber. If you want treated you can purchase your own boards and wrap them with the CE Smith Deluxe Marine-Grade Carpeting for Bunk Boards part #CE11330.

Hey Thomas, this is a great question but the size 4.80-8 is the same as the 4.00-8 which is why it is listed as 4.00/4.80-8. This the correct size for you need based on it's bolt pattern of 5 on 4-1/2 inch as well.

I recommend upgrading to the Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" Galvanized Spoke Wheel #AM31202 for the Malone MegaSport Kayak Trailer #MPG535. This radial tire is only roughly 3/4" taller than the stock tires which come on…

The #AM31199DX wheel/tire combo you referenced would be a great choice for you. The radial tires will give you a much better highway ride, and because radial tires typically run cooler you'll likely get longer life out of them. The tires will…

Yes, a galvanized wheel will resist rust and corrosion better than a painted/coated wheel. This will apply to both the bead seat and face. In regards to cost, if you do not have access to a tire mounting machine or the means to use one for that…

Yes you can get new tires for your Malone MicroSport trailer with a speed rating higher than the 65 mph rating of the tires it comes with. For the same size 4.80-12 tires with an 81 mph speed rating use the following: - Taskmaster 4.80-12 Radial…

The standard plate to put the VIN sticker of the Malone Microsport Lowbed Trailer Model #MPG460G is on the frame of the trailer. Since the tongue of this trailer is removable I put it further back than that on the portion of the frame that splits off…

Long story short, yes you can. But going with the ST205/75R14 would be a better replacement than a ST205/75D14 because the R in the first size means it is a radial tire whereas the D in the second size means it is a bias ply. The main difference…

The diameter of the mounting bolt hole on the CE Smith Bow Roller Bracket for Winch Stands, #CE31005PG, is .45 inch. The bracket uses a 5-1/4 inches long x 1/2 inch diameter steel shaft for attaching the roller/Y-stop, which is part #CE10700A. The…

The Kenda 205/65-10 Bias Trailer Tire #AM3H490 that you referenced has the standard trailer tire speed rating of 87 miles per hour. There are some trailer tires that have higher speed ratings, but none of them are in the 10 inch rim size since that…

The Fulton Winch Model 228 is a very old model and there will be no direct replacements for this. I recommend simply selecting a winch that meets your weight and mounting requirements. The Fulton Single Speed Trailer Winch part #F142101 for example…

The base for Yates bow stop #YR6Y33-4 measures 3 inches by 2-7/8 inches. I have included a picture showing the measurements for you. Bow stop #YR4Y22-3 has a base that is 2 inches by 2 inches and a 4 inch span. That might work for you since the…