A few inches at the front of your trailer can be the difference between storing it inside and leaving it outside. This weld-on swing tongue kit is designed for a 3" x 4" tongue and folds for storage, helping your trailer fit in your garage.
Many trailers miss fitting indoors by only a small amount at the front. This swing tongue kit lets your trailer tongue fold for storage, reducing the front footprint after parking and creating the clearance needed to use your garage. By making indoor storage possible, it can also help protect your trailer from weather exposure and keep it ready for the next trip.
Swing tongue kits aren't one-size-fits-all. This kit is intended for 3" x 4" trailer tongue applications and includes a matching pivot box sized for that dimension. Your trailer gets a folding tongue setup built around the correct tongue size instead of adapting a universal hinge.
This is a weld-on assembly that becomes part of your trailer tongue after installation. Once the tongue is cut and welded, the folding section remains integrated into the structure while continuing to provide the storage flexibility that drives most swing tongue upgrades.
Included hinge plates, pivot box, mounting hardware, and hitch pin create the folding joint. The hinge assembly is built around Dexter's standard swing tongue design, with matched hinge components. The 5/8" x 5" hitch pin locks the tongue in position when folded for storage.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone. Steven here with etrailer. Today, we're taking a look at the Dexter Standard Swing Tongue Kit for trailers that use a three inch by four inch trailer tongue. So if your trailer's just a little bit too long to fit inside your garage, most often that tongue is the only thing keeping it from closing. And primarily, you're going to see these a lot on boat trailers, maybe Sea-Doo trailers, wave runners, those kind of things because they tend to have a longer tongue than most standard trailers do. So with this swing away design, you'll be able to shorten the trailer's overall length when it's parked and potentially allow you to store it somewhere that maybe you just couldn't before.
Now this is a welding application. So I have a loose plate here, a loose plate on the bottom, I have one bolt that comes through, and then I have my pull pin. And the idea is once you get this welded in place, you can then simply pull the pin and then that tongue would swing away allowing you to have more space inside of either garage, parking location, maybe it's an alleyway, who knows But that's the idea of these swing away tongues here. And again, getting that trailer inside can be a pretty big benefit. Some HOAs have rules about trailers sitting outside, viewable areas, and those kind of things as well, depending on where you live.
So this can save you a lot of hassle for those kind of things as well. Now again, cutting and welding is a structural part of your trailer, so make sure you do the installation with somebody that is a professional and that has the proper welding and fabrication experience. If you don't know anybody, you can use our install locator link below. It's generally found beneath the photo set on the product pages. Click on that link, type in your zip code.
Based on your location, we can help find someone to do the install in your area that we are affiliated with. Well, that's going to wrap up our time together folks. I'm Steven. Thanks for watching.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.