bing tracking image
Q & A Icon

Identifying Base Plate Kit of 2006 Jeep Liberty to Use with Roadmaster Tow Bar  

Published 08/14/2025

Question:

Ok if bought a 06 jeep liberty, all set up to flat tow but it is a different connector than my roadmaster falcon 2 tow bar. Looking for the adapter that can go between the two, the shaft end on the car is 2.230. With a step up to a slot end, and a offset spring lock pin. I would attach a picture of the two if it would let me.

0

Expert Reply:

Hey Dennis, it almost sounds like you have a Blue Ox base plate kit installed on your 2006 Jeep Liberty like the part # BX1122 which would be correct for your vehicle. Does this look like what you have? If not email me back with a picture of what you have and I will be able to ID it and see if there's an adapter made for it.

If it is a Blue Ox base plate kit the correct adapter you'd need would be the part # RM-031.

expert reply by:
0
Jameson C
Dennis D. profile picture

Dennis D.

8/14/2025

Yes the rm 031 looks correct, now i looked at the RM 031 it won't let me go back to the dimensions, but the car end the gap is .625 and the sides are .500, but if the center piece will go into the dlot it should work. Thanks I would send pictures but it won't let me down load them.

Jameson C. profile picture
Etrailer Expert

Jameson C.

8/14/2025

@DennisD You'll have to email me the pictures at [email protected]

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>