EcoHitch for 2025 Toyota Camry to Carry Yakima FullSwing Bike Rack

Question

Question:

I want to install an echo hitch 2 inch receiver on my 2025 camry le awd. I want to get a yakima full swing to use for two bikes, will this hitch work with this rack with the existing auto pin on the rack? Thanks for the response.

asked by: Brant K

0

Expert Reply:

Hey Brant, yes the EcoHitch part # EH77CR that you referenced is a great option for your 2025 Toyota Camry to carry the Yakima FullSwing bike rack part # Y02465. The hitch pin of this rack will work just fine with the EcoHitch. What kind of bikes do you have?

expert reply by: Jameson C

0

Brant K.

8/13/2025

I will either carry two road bikes, pretty light, two mountain bikes or occasionally 1 e bike. I was wondering on this because by measurement if you push the rack up to the pin button it appears that the pin would be past the pin hole or if you send the pin you are leaving the rack about maybe 1.5 inches maybe a bit less from insertion up to the pin release button. Which way is best? It looks like even pushing the pin past the pin hole if there was any movement it would still engage. Thank you for the response! Brant

Jameson C.

8/13/2025

@BrantK How much does the e-bike weigh? Typically they are heavier than what hanging bike racks can handle. The Fullswing has a 40 lb per bike weight capacity. The majority of what holds this rack into the hitch is the anti-rattle wedge that gets tightened into the hitch tube. I would just worry about getting it tight in the hitch tube and it won't go anywhere.

Answer 1

Hey Zach, this is a really great question that I don't have a super exact answer for but I can still help. So our hitch manufacturers will basically make a hitch for any vehicle there is a demand for one. Including your 2025 Toyota Camry with the…

view full answer...

Answer 2

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 3

Hey Alan, There is a little bit of trimming needed, but not on the bumper or anything visual on your 2025 Toyota Camry when you install the Curt Trailer Hitch Receiver #C94RV. I've added a couple of photos below which show the trimming needed,…

view full answer...

Answer 4

No, it's not but we hear this regularly from dealerships about the hybrids. I did check with Curt and I can confirm their Hitch Receiver item #C94RV has been confirmed to fit all models of the 2025 Toyota Camry including the hybrid. This hitch is…

view full answer...

Answer 5

Hi Ann, It is not possible to put a 2 inch hitch receiver on your 2025 Toyota Camry. The only size hitch for this vehicle has a 1-1/4 inch receiver, the Curt Trailer Hitch Receiver #C94RV.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 11

Hey Claudia, I checked with Curt just now and confirmed that their hitch part #C64DR does fit all models of the 2026 Toyota Corolla Cross which includes the hybrid models so it would work great for you. We also had customers with similar hybrid…

view full answer...

Answer 12

Hey Michael, congrats on the new SUV. The EcoHitch item #EH87CR does not require you to remove the rear bumper assembly when installing. It does require some slight fascia trimming though. You'll have to remove a 2-3/4” deep and 4-1/2” wide…

view full answer...

EcoHitch for 2025 Toyota Camry to Carry Yakima FullSwing Bike Rack

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching