Thickness Of Aluminum On DeeZee Underbed Tool Box DZ77

Question

Question:

Looking for the thickness of the aluminum? Thanks Jim

asked by: James L

0

Expert Reply:

Hey James,

The thickness of the aluminum on the DeeZee # DZ77 you were looking at is .090" or between an 1/8" and a 1/16" thick.

expert reply by: Samuel C

0

Samuel C.

9/2/2025

Hey Jim, did the aluminum thickness meet your needs for the tool box? I'm asking because your experience could help others with similar questions.

Answer 1

The DeeZee Specialty Series Underbody Toolbox #DZ77 weighs 36 lbs. This toolbox measures 36" long x 20" wide x 18" tall overall and will give you 7 cubic feet of storage capacity. You will need to use the DeeZee Mounting Kit #DZDB-2502…

view full answer...

Answer 2

Hey Steve, a 5.H error code on the Tekonsha Primus IQ Trailer Brake Controller #TK90160 means that the brake wire sees a short during idle condition - This can also be caused by using certain test lights or non-Tekonsha testers. To fix it you're…

view full answer...

Answer 3

We've got the exact replacement breakaway system battery you're looking for. You'll need the Hopkins #HM20008. As you can see in the provided photo, the #HM20008 is a direct replacement.

view full answer...

Answer 4

Hi Torree! Thanks so much for the beautiful photo of your Entegra Coach. What a great-looking setup! To answer your question: the Yakima EXO Swing Away Cargo Carrier part #Y72VR isn’t rated for use on the back of a motorhome. That’s because it hasn’t…

view full answer...

Answer 5

Hey Dusty, the pilot diameter of the Dexter hub part #K08-288-90 that you referenced is 4-3/4 inches.

view full answer...

Answer 6

Yes, the Reese Goose Box #RP94716-61301 is the correct Goose Box for the Lippert 1116 pin box. I have included a link to the installation details for you to view.

view full answer...

Answer 7

It sounds like you may have a short in the wiring on your 2022 Ford F-350. You can use a Multimeter #PT29ZR to check this at your 7-way by checking for continuity with the brake wire and any other wire on the 7-way. You can see the terminals in the…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The appropriate torque spec for any application will vary depending on the construction of the wheel as well as on the stud size. I suggest checking the wheels you're using to see if their manufacturer has a suggested torque rating. Steel trailer…

view full answer...

Thickness Of Aluminum On DeeZee Underbed Tool Box DZ77

Product Page this Question was Asked From

Continue Researching