Can The etrailer Anti Rattle Device e38FV Be Used On A 2026 Honda Pilot OEM Hitch?

Question

Question:

I have a 2026 Honda Passport RTL Towing. I am interested in your e38FV anti rattle hitch product. No pictures show this unit installed with safety chains attached to their safety rings. Could the chains possibly knock your unit off? What are the outside dimensions of this unit? I am not sure if the attachment ears will get a good bite behind the metal ring around the hitch. Is the tightening screw a fine thread and not easily loosened? Thank you for your answers. Sincerely

asked by: Irwin S

0

Expert Reply:

Hi Irwin!

The etrailer anti-rattle device # e38FV outside edge measures 3-7/8" H x 4-1/2" L x 5/8" W. Little surprised we don't have any picture of this installed with safety chains hooked up (I will see about getting that added to the page, it would be good to see), but I don't see any way for safety chains to knock it off. This will install from the bottom of the hitch receiver, so safety chains would technically pull this up if they were ever engaged in a disconnection event.

The attachment ears/brackets are designed to clamp on to that metal ring around the receiver opening and I have not had anyone come back saying it wasn't sufficient for the hitch on your 2026 Honda Passport. The tightening bolt does have fine threads as well, so it does not easily loosen or back out. When it's tight, it's tight.

What are you planning on using this for on your Honda Pilot?

expert reply by: Lazer S

0

e38FV Anti Rattle Device Dimensions
(click to enlarge)

Irwin S.

7/28/2025

Lazer S. Thank you for your reply to my questions I would be using it on my 2026 Honda Passport. I am having ball mount issues with the opening of the tailgate to trailer front crank/wheel clearance. I have made a wooden copy of the e38FV to see how it would work in my situation. At this stage it is questionable. Need to have the e38FV in hand for actual fitment. Must finalize the ball mount first Looks like a 13" shaft may do the trick as an 11.5" one only gave me 1/4" clearance on level ground. Thanks for your information. Irwin Staples

Lazer S.

7/30/2025

@IrwinS You're welcome! We do have some pretty long ball mounts, but do you know how much rise you need? Typical trailer is 18" from the ground to the bottom of the coupler and hitch height is measured to the inside top of the receiver. If you can get me the hitch measurement, I can definitely find you something! If you don't think our anti rattle device will work for you, I have always been a fan of the Roadmaster # RM-062. It's the embodiment of the KISS Principal (Keep It Simple, Stupid) as it's literally a u-bolt and a bar going across it. May be better in your case.

Irwin S.

8/1/2025

@LazThanks for your suggestions. I have a Curt 6" rise, 13" shaft on order. The # RM-062 is for a 2 1/2" receiver and mine is a 2" receiver. Anyhow for now I have to clear the front trailer jack with the tailgate of the 2026 Passport. Irwin

Lazer S.

8/4/2025

@IrwinS That Curt was actually the one I was thinking. : ) And I meant the include the # RM-061 for the 2" hitch, sorry about that. Let me know if there is anything else you need and if that Curt works. I think it will.

Answer 1

Hello Craig, Yes, you can install our etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers #e38FV so that the knob is to the right, and not on the bottom. I attached an image to show the correct ways to install it. What are you you going to…

view full answer...

Answer 2

Hey Gary, thanks for reaching out. When using the etrailer Anti-Rattle Hitch Collar #e38FV, you will want to check the wing nut every time you tow. Anytime you change accessories, or load/unload you will want to check and make sure it is tight. As…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hi Mike; we don't have a way to swap out the 2" ball on the Andersen Weight Distribution Hitch #AN88VR. We do have the 2-5/16" ball separately, #AN45VR, but we don't have it as a complete system. If you really want the Andersen,…

view full answer...

Answer 5

Hey David, yes the EcoHitch front hitch part #EH83GR that you referenced does fit for your 2019 Ford F-450. What are you planning on using it for?

view full answer...

Answer 6

Hello Shawn, The 24x60 etrailer Enclosed Cargo Carrier for 2" Hitches - Steel - 440 lbs #e54VV is a great option for hauling your gear while keeping it protected. We do have a cover available for it as well! You will want the Cargo Cover for…

view full answer...

Answer 7

Good afternoon Stephany, I'm sorry you had that less-than-stellar experience with the pin style anti-rattle device. Normally that setup works pretty well, but in some extreme towing situations, I definitely think the clamp style is better at…

view full answer...

Answer 8

Hey Art, I was able to confirm with Hollywood Racks, the Sport Rider #HLY87RR can be used on a class B van! Generally, racks that can fold like the Sport Rider won't be rated for towable RVs or travel trailers. The reason is that they have…

view full answer...

Answer 9

Hi John! The etrailer Anti-Rattle Hitch Stabilizer for 2" Hitches - Vinyl Coated Steel #e99007 could be used with weight distribution, but I don't think it's the one I would go for. It works really well for things like bike racks, cargo…

view full answer...

Answer 10

The Atwood jack 80274 was an A-frame type side-wind tongue jack with a 2K weight rating which we have several options for that would work great as a replacement. The Pro Series Round, A-Frame Jack w/ External Gearbox #PSRV20000103 that you referenced…

view full answer...

Can The etrailer Anti Rattle Device e38FV Be Used On A 2026 Honda Pilot OEM Hitch?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching