Do You Have a 5 Leaf Slipper Spring 26" Long for My 2007 EZ-Loader Boat Trailer?
Updated 09/02/2025 | Published 06/26/2025
Question:
I’m looking for 4 boat trailer leaf springs for a 2007 ez-loader . They are 26”long, 5-leaf, slipper type spring, but the open end has a ‘C hook’. The open end is bent upward. Thank you,
asked by: Stan
Expert Reply:
Hello Stan,
What are your axles rated for on your 2007 ez-loader? The closest thing we have to what you are describing is the 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles - 26-1/4" Long # e33SR. My main concern is that you said 26" and the one I mentioned is 26 1/4". Most of the time when you replace a leaf spring you need something that is shorter than the measurement you get as they do stretch over time.
You want to make sure you are measuring the leaf spring unloaded, sometimes it is best to jack the trailer up to get as much weight off as possible. I attached an image of the dimensions for the # e33SR. I would need to know your axle capacity to confirm on whether it will work or not.
What kind of boat are you hauling on that trailer?
(click to enlarge)
Product Page this Question was Asked From
etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles - 26-1/4" - Dacromet
- Trailer Leaf Springs
- Slipper Springs
- 9/16 Inch Eye
- Nylon Bushings
- 4300 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 26-1/4 Inch Long
- Marine Grade
- etrailer
more information >
Continue Researching
- Search Results: trailer leaf springs
- Q&A: Is Bushing Required on Open Eye End of Slipper Spring
- Video: Spring-Eye Bolt with Locknut for Slipper Springs: The Breakdown
- Video: etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles Review
- Shop: Nylon Bushing - 9/16" Inner Diameter, 7/8" Outer Diameter - 1-3/4" Long - Qty 1
- Shop: Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Shop: etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles - 26-1/4" - Dacromet
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Shop: Dexter Shackle Bolt for Double Eye Springs - 9/16" Diameter - 2-7/8" Long - Qty 1
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 3-3/4" Long
- Shop: Shackle Bolt for 1-3/4" Wide Double Eye Springs - 9/16" Bolt Diameter - 3" Long
- Q&A: Can Non-Galvanized Axles Be Used With a Boat Trailer
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: Measuring To Choose The Right Trailer Axle
- Article: Trailer Wiring Diagrams
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Article: How to Accurately Measure Trailer Leaf Springs
- Search Results: trailer wiring
- Shop: Suspension Enhancement
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Video: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles Spec Review
- Q&A: What is the Difference Between the MORryde CRE3000 and AllTrek 4000 Suspension Kits
- Shop: Brake Controller
- Video: Review of Lippert Trailer Suspension Parts - Equalizer Upgrade Kit - LC53CK
- Search Results: trailer suspension parts
on Trailer Leaf Springs
Kate F.
9/2/2025
Hey Stan, Did you find out the axle capacity for your 2007 ez-loader and were you able to determine if the 4-Leaf Slipper Spring I mentioned would work for your setup? I'm asking to make sure we can help others who might have a similar trailer.