Suspension Enhancement For A Trailer With 8,000 Pound Axles
Updated 09/02/2025 | Published 06/25/2025
Products Featured in This Question
Question:
Would these be for 8k axle?
asked by: Nick
Expert Reply:
Good question, Nick!
The Dexter Replacement Dexter Bolt-On Shock Kit # K71-697-00 is designed to fit a 2-3/8" or 3" diameter axle. An 8,000 pound axle will measure 3-1/2", so I cannot recommend going this way. It will be underrated and won't really do what you want it to.
I know this is quite a bit more expensive, but the Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers # RM-2470 is specifically designed for an 8,000 pound 3-1/2" axle and would be what I recommend (plus the # RM-2470-50 if you have 3 axles). We have sold quite a few of these and I can honestly say I have never heard a bad thing after the install was done.
Are you 100% on going the route of shocks? We may have another option if you are interested.
(click to enlarge)
Product Page this Question was Asked From
Replacement Dexter Bolt-On Shock Kit for 2-3/8" or 3" Diameter Axle - Single Axle
- Accessories and Parts
- Trailer Suspension Parts
- Shocks
- Dexter
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers - 8,000-lb Axle
- Search Results: accessories and parts
- Video: Review of Terran Axle Trailer Suspension Parts - Tandem-Axle Hanger Kit - TX85VJ
- Shop: Terran Axle Tandem-Axle Hanger Kit for Slipper Springs 3-3/4" Tall Front
- Shop: Dexter Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal
- Shop: Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Video: The Low-Down on the Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs
- Video: Hands-On with the Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs
- Q&A: Trailer Suspension Enhancement For a Triple Axle Trailer With 8,000LB Axles And Slipper Springs
- Q&A: Will the Bolt-On Shock Kits for Trailers Work With Underslung Axles
- Shop: Roadmaster Comfort Ride Add-On Kit for Triple Axle Trailers - 5,200-lb to 7,000-lb Axles
- Shop: 7-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles - 26-5/8" Long
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7-1/16" Long U-Bolts
- Q&A: What Replacement Shocks do I Need for My 2015 Heartland Bighorn 3010RE?
- Q&A: Length Of The Dexter Bolt-On Shock Kit # K71-697-00
- Q&A: What Lug Stud Size Works w/ the Taskmaster Modular Wheel?
- Q&A: Can I Use a Hand Pump Brake Bleeder w/ a DeeMaxx Disc Brake Kit w/ Actuator for Tandem Axle Trailers
- Q&A: What Disk Brake Kit do You Recommend for My 2024 Brinkley Z3100 5th Wheel?
- Article: Brake Controller Installation: Starting from Scratch
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Measure a Trailer Axle
Lazer S.
9/2/2025
Hey Nick, Did you decide to go with the Roadmaster Comfort Ride Shock Absorbers for your 8,000-pound axle, or are you considering other options? I'm asking because your experience could help others in a similar situation.