Is There Trailer Jack that Has Best Tailgate Clearance

Question

Question:

Do you sell any tongue jacks that controls face on the side so that a truck tailgate can go down? Thanks,

asked by: Patty J

0

Expert Reply:

Hey Patty, the a-frame trailer jack we offer that has the best tailgate clearance is the Ultimate Trailer Jack part # 322-RDJ-2K which allows you to vertically adjust how high the crank handle is. Otherwise if you are looking at a powered a-frame jack like the # EJ-3520-BBX you can install these rotated so that the motor is off to the side. Which style are you looking for?

expert reply by: Jameson C

0

Patty

6/19/2025

Thank you. We will consider these options. Appreciate the response.

Reply

Jameson C.

6/19/2025

@Patty Glad to help! Let me know if you have any other questions.

Reply

Answer 1

We don't have a video or a diagram unfortunately for removing the cover of the Electric Jack w/ Footplate #EJ-3520-BBX but I can tell you there's a screw on either side of the cover and a few screws on the bottom of the jack. The bottom…

view full answer...

Answer 2

There isn't a set formula for picking out ball mount length like there is for ball mount rise/drop. Typically around 7 to 10 inches works for most people. Some people will go longer if they are trying to be able to drop a tailgate and there's…

view full answer...

Answer 3

What you need to replace the light in your Ram Jack a-frame powered jack is the part #EJ-3520-LT.

view full answer...

Answer 4

Yes, you can rotate the Electric Jack w/ Footplate part #EJ-3520-BBX in one of three ways so that the controls face forward, back to the right, or back to the left. Just remove the nuts/bolts, rotates, then reinstall once you get the jack in the…

view full answer...

Answer 5

Hey Rob! The pin for the Ultimate Trailer Jack #322-RDJ-2K sits 3/4" above the mounting plate, is 1" thick, and sticks out 3" from the body of the jack (see attached photo). The bolt pattern for the mounting plate is symmetrical so you…

view full answer...

Answer 6

I do have an option for you but I don't have any way to reduce the ground clearance of your existing a-frame jack . That said, what you can do to fix this issue is replace your existing jack with the Ultimate Trailer Jack part #322-RDJ-2K. The…

view full answer...

Answer 7

The only differences between the Demco eZ-Latch Couplers #DM37ZR and #DM14793-81 is that the former has integrated loop holes for installing safety chains and a about a 2" drop while the latter doesn't come with provisions for attaching the…

view full answer...

Answer 8

Hi Robert, So there isn't one that can be used with a cordless drill (which would be an electric jack only) as all the electric A-frame jacks are all higher than the 12" to 14" you want. There is a manual crank jack you can use which I…

view full answer...

Answer 9

Hey Michael. The Performance Tool LED Safety Flare Set item #PT54PJ are powered by three AAA batteries each. What kind of vehicle do you have?

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Cres, how high of altitude are we talking? The Furrion RV Tankless Water Heater #FR98SR works well at high altitude. In fact, Furrion states, "This appliance can be used at high altitude and has been tested at up t0 4,500 ft."

view full answer...