Highest Weight Rated Scissor Stabilizer Jack for Camper  

Hey Doug, welcome back! The Leveling Scissor Jack - 24" Lift - 5,000 lbs item #JSC-24-IND and the Scissor Stabilizer Jacks - 18-3/4" Lift item #TJSCHD-24 are going to be made of the same 14 gauge steel. The difference in capacity has to do…

The support capacity of the scissor jacks are for each jack individually. So the part #UF48-979031 comes with two jacks that are each rated for 6,500 lbs. So you'd multiply that by how many jacks you end up using

The difference between the MORryde Scissor Jack Cross Brace Stabilizer for Trailers and RVs #MR82AR, and the JT's Strong Arm Jack Stabilizer Kit #LC191023 is while both limit side to side movement of your 30' travel trailer, only the JT will…

Hey Allen, thanks for reaching out. For bolting on the etrailer Scissor Stabilizer Jacks #e36VV the recommended hardware is self-tapping 3/8" x 1" screws. If you use that, you won't need any bolts or washers or anything. You'll want…

Hey Jason, thanks for reaching out. At this time Furrion does not offer an upgraded or extended-range antenna for the Vision S+ camera system #FR74AD. The only antenna available is the standard one that comes with the system, and there is not…

Thanks for the pictures and measurements Tim! The Terran Industries 5-Leaf Double Eye Spring item #TX93RJ are going to be the best option to replace your 26.5" long springs. This spring has a 3,500 lbs capacity so it's going to be a solid…

I apologize for any confusion on what the proper torque specs are for 1/2 inch lug nuts on trailer wheels. I attached a picture of a chart to the right that details what the proper torque specs are for a trailer wheels lugs based on lug size, wheel…

Hey Beth, yes the Dometic FreshJet 3 part #DMC69ZR can replace your Dometic Duo Therm and would do a great job.

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…