Does Curt Hitch part # C11681 Fit 2015 Honda Accord Coupe

Question

Question:

Hi. I was looking at the Honda Accord hitch. Does it also fit the coup?

asked by: Yvette Y

0

Expert Reply:

Hey Yvette, yes the Curt hitch part # C11681 that you referenced is also a fit for the 2015 Honda Accord Coupe models. What are you using the hitch for?

expert reply by: Jameson C

0

Hitch R.

5/13/2025

I am also interested the bike rack you have, and wondering if I need another part that was noted. See below. Keep Your Bike Secure: Stabilization Strap Requirement Transporting bikes on your Honda Accord can be risky if the hitch sways. The Curt Trailer Hitch Receiver, #C11681, resolves this with a required stabilization strap for non-trailer loads like bike racks.

Jameson C.

5/13/2025

@HitchR That is an older requirement from Curt that isn't required any longer. Sorry for the confusion on that! At one point all of their hitches required a strap like then when carrying non-supported loads like bike racks.

Yvette B.

5/13/2025

@JamesonC Thank you, I look forward to making my purchase and going on biking trips.

Jameson C.

5/13/2025

@YvetteB Nice! Do you have a bike rack already?

See All (5) Replies to Hitch R. ∨

Answer 1

The Curt Class III trailer hitch for your Pathfinder, part #C13126 would utilize nuts that are welded up into the frame member. The conical toothed washers used in the installation do a good job of maintaining the torque applied to the bolt during…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 6

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 7

Hey David, thanks for reaching out. Yes, the Curt Trailer Hitch Receiver #C82RJ will indeed fit the 2027 Kia Telluride. This hitch is still in the pre-order phase, but it is being going to fit both the 2026 and 2027 Telluride. Right now, we are…

view full answer...

Answer 8

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 9

It sure is Rob, and congrats on the new SUV. The Oris Trailer Hitch with Detachable Hitch Receiver item #TS76VR is definitely comparable to the Stealth Hitches item #SH87FR. It's got the same kind of removable receiver that works great with a…

view full answer...

Answer 10

Hey Aaron, great question! The Trailer Mate Trailer Hitch Receiver #TMT67FR is definitely a budget friendly option for a hitch on your 2026 Highlander. This is basically the economy line from Curt. The welds are a little different (but will still do…

view full answer...

Answer 11

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Answer 12

Hey Bryan, congrats on your new SUV. As of (05/13/26) the Curt Hitch item #C82RJ and the Curt 4-Way connector item #C34MJ are the only parts we know of that are going to be coming out for the new 2027 Kia Tellurides. It's super early in the year…

view full answer...

Does Curt Hitch part # C11681 Fit 2015 Honda Accord Coupe

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching