Will Air Lift Air Bag Kit Fit with Timbren Kit on a 2019 Fleetwood Southwind 35K

Question

Question:

It appears that this kit fits a 2019 Fleetwood Southwind 35K. In the installation video it looks like the factory bump stops can be left in place. Will I need to remove my Timbren bump stops to use these bags? Do they interfere with a rear trac bar?

asked by: Patrick M

0

Expert Reply:

Hey Patrick, thanks for reaching out!

The Air Lift LoadLifter 5000 Air Helper Springs # AL57344 will fit with the Timbrens on your 2019 Fleetwood Southwind 35K as long as they are located in the same location as what you saw in that video. Since these air bags install above the leaf springs, they won't interfere with your rear trac bar either.

Let me know if you have any other questions!

expert reply by: Jon G

0

Pat

4/23/2025

Thanks Jon. One other thing I have noticed in pictures is that the air bags don't always appear to be mounted directly over the axle. Is that the case in my 2019 Fleetwood Southwind 35K or are they centered directly over the axle?

Jon G.

4/28/2025

@Pat I believe these will mount directly above the axle, but the best thing for you to do to verify will be to see where the mounting bolt holes are on your frame. We have some limited pictures for this product and I'm not sure they are all on the same exact RV that you have.

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 3

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Hey Kevin, yes we have the SumoSprings kit part #SS46KJ that is a fit for your 2025 Chevrolet Silverado 2500 HD. This is the medium density foam spring provides 2,800-lb support capacity at 50% compression and also requires no drilling for install!…

view full answer...

Answer 6

Hi Paul! Since you said occasional towing, I am going to steer you away from the Timbren option. They can be pretty rough and you will definitely feel it when you are not towing. If you had a constant load, it would have been an option, but I…

view full answer...

Answer 7

Hey Steve! You need to leave the breakaway pin installed in the Curt RVibrake Shadow 2 #RVI94FR. The breakaway operates independently for safety, so even if you're disconnected from an RV it will activate the vehicle brakes. The only way around…

view full answer...

Will Air Lift Air Bag Kit Fit with Timbren Kit on a 2019 Fleetwood Southwind 35K

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching