Availability of Mounting Brackets for Tandem Axle Teardrop Fenders w/ Backing Plates
Updated 09/26/2025 | Published 04/23/2025 >
Question:
For fenders part HP92VR, what mounting brackets are needed per one fender? Do you have a video or diagram on how these are installed with the brackets? Is there anything else needed besides hardware to install these fenders? Thank you.
asked by: Shelby H
Expert Reply:
Hi Shelby; the Tandem Axle Teardrop Fenders w/ Backing Plates # HP92VR are typically welded on for installation. We do not have any brackets available to mount these on a trailer. If you take a look at the attached picture you can see the welds along the top of the fender.
It is also acceptable to bolt them on but you will need to choose hardware based on where you're mounting them and the type of surface. This is something you can pick up at your local hardware store. If you want to use brackets you certainly can but you will have to make them yourself.
Product Page this Question was Asked From
Tandem Axle Teardrop Fenders w/ Backing Plates - 15" to 16" Wheels - Qty 2
- Trailer Fenders
- No Step
- 15 Inch Wheels
- 16 Inch Wheels
- 10-3/4 Inch Wide
- 72 Inch Long
- Steel
- Bolt-On
- Weld-On
- For Tandem-Axle Trailers
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: tandem fenders
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Shop: U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
- Shop: Tandem Axle Teardrop Fenders w/ Backing Plates - 15" to 16" Wheels - Qty 2
- Video: Detailed Breakdown of the Tandem Axle Teardrop Fenders w/ Backing Plates
- Article: How to Determine Tire/Wheel Diameter
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Shop: CE Smith U-Bolt Kit for Mounting 5.2K to 7K, Round Trailer Axles - 7" Long U-Bolts - Zinc
- Shop: CE Smith U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4" Long U-Bolts - Zinc
- Shop: CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Q&A: How to Find Replacement Axle for Hurricane HUR 2178 Boat Trailer
- Search Results: trailer fenders
- Search Results: lug pattern
- Article: Trailer Lighting Requirements
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer tires and wheels
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Shop: Suspension Enhancement
- Search Results: trailer wiring
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Search Results: trailer jack
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS



Robin H.
9/26/2025
Hi Shelby, did you decide to weld the fenders on, or did you go with bolting them instead? I'm curious to know how it worked out for you, as it could help others facing the same decision.