Draw-Tite Hitch and Wiring for a 2025 Volkswagen ID Buzz

Question

Question:

Is the draw tite hitch receiver for the 2025 VW ID Buzz in stock and available? Do you guys sell a trailer wiring kit?

asked by: Timmy N

0

Expert Reply:

Hey Timmy, thanks for reaching out!

Yes, the Draw-Tite Hitch # DT33KV that fits your 2025 Volkswagen ID Buzz is available to purchase, but it does look like there is a bit of a back-order situation at the moment (April 2025) since its brand new.

For wiring you'll want the Tekonsha T-One # TK98DR as a direct fit that tees in behind your taillights.

Are you looking to use this for towing, or mote for a bike rack/cargo carrier kind of deal?

expert reply by: Jon G

0

Jon G.

9/26/2025

Hey Timmy, did you decide to use the hitch and wiring for towing, or are you planning to attach a bike rack or cargo carrier? I'm curious to know how it worked out for you, as it could help others with similar setups.

Answer 1

Hi Keenan; at this time there are no photos available of the Curt #C42ZJ on a 2025 Volkswagen ID Buzz. Since the hitch is a pre-order and hasn't been released yet we haven't had a chance to install one and add our own photos. Curt usually has…

view full answer...

Answer 2

Hey Doug! The Curt Hitch item #C42ZJ is a preorder so no information has been released about it yet. We know it's going to fit the 2025 Volkswagen ID Buzz but that's it for now. (04/25/25) What are you planning on using the hitch for?

view full answer...

Answer 3

I would assume so. As long as there's a demand for one the manufacturers will make one.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Draw-Tite Hitch and Wiring for a 2025 Volkswagen ID Buzz

Continue Researching