Upgraded Equalizer For Trailer With 5-3/4" Equalizer Measurement and 33" Axle Spacing
Updated 10/22/2025 | Published 03/27/2025
Question:
I would like to upgrade my travel trailer suspension but the current hanger bracket dimensions prevent me from using the Morryde CRE3000. The spring hangers only have 2 clearance from the spring mounting hole to the frame. It has a 33 wheelbase and it is 59.5 between the end hangers. The current equilizer has 5.75 between the horizontial holes and 2 vertical to the upper hole. Can you recommend an upgraded shock absorbing equilizer kit that will fit?
asked by: Daryl S
Expert Reply:
Hey Daryl! Based on your measurements you need the Dexter E-Z Flex Suspension Kit # K71-652-00. This matches your 5-3/4" and 2" measurements so you won't have a problem with those hangers. The kit also comes with wet bolts, bronze bushings, and heavy-duty 2-1/4" shackle straps. Kevin installed these on my Jayco, which you can see in the attached video, and I can say they have really improved the ride quality. If you need anything else feel free to reach out in the comments below.
(click to enlarge)
Product Page this Question was Asked From
Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 5-5/8 Inch Long
- Tandem Axle
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer leaf springs
- Search Results: dexter equalizer
- Shop: Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Video: Detailed Breakdown of the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles
- Video: CE Smith Bunk-Style Guide-Ons for Boat Trailers Feature Review
- Article: How to Measure a Trailer Axle
- Video: Review of TruRyde Trailer Leaf Springs - Double Eye Springs - TRU25FR
- Video: Review of EMCO Trailer Leaf Springs - 4 Leaf Double Eye Spring 5000 lbs Trailer Axle - EM66RB
- Shop: Lippert U-Bolt and Nut Kit for 8,000-lb Trailer Axles - 3" Wide
- Shop: Lippert U-Bolt and Nut Kit for 3,500-lb Trailer Axles - 2-3/8" Wide
- Shop: Lippert U-Bolt and Nut Kit for 2,200-lb Trailer Axles - 1-3/4" Wide
- Shop: 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Shop: 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Shop: 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Video: Hands-On with the U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles
- Q&A: Will Taller Leaf Springs Lift My 2014 Hyper Lite Toy Hauler Enough to Protect the Water Tank?
- Q&A: Replacement 25-1/4" Long 4-Leaf Leaf Spring for a Lippert 129745 Leaf Spring
- Q&A: Are 5,200 lb Leaf Springs Rated Too High To Replace 3,500 lb Leaf Springs
- Q&A: How to Determine Where to Put Trailer Axles on 18 Foot Dovetail Trailer
- Q&A: Comparing USA and China Leaf Springs for a 2006 Keystone Raptor
- Q&A: How to Determine the Capacity of Trailer Leaf Springs and How to Raise the Coupler Height
- Q&A: What Is The Difference Between Different Sized Hangers, Equalizers, And Shackle Straps
- Video: Dexter E-Z Flex Suspension Kit Spec Review
- Shop: Suspension Enhancement
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Trailer Suspension Parts
Robin H.
10/22/2025
Hey Daryl, how did the upgrade with the Dexter E-Z Flex suspension kit go on your trailer? I'm curious if it gave you the smoother ride you were looking for. Your feedback could help others thinking about the same change.