Does the 2K etrailer Axle Kit Need a Washer Between the Outer Bearing and Axle Nut?
Updated 10/27/2025 | Published 03/23/2025
Question:
Should there be a washer between the outer bearing and axle nut? My e37YR axle/hub did not come with them. Thank you
asked by: Dwayne G
0
Expert Reply:
Hey Dwayne, thanks for reaching out!
The Trailer Axle with Idler Hubs # e37YR will not need the washer because it is a 2K axle. If you had something like a 3.5K or up then it would need a washer, but the lightweight ones don't require them.
Are you installing the axle yourself?
expert reply by:
Jon G
0
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- 58 Inch Spring Center
- 72 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Q&A: How to Measure for a Replacement Axle, Hubs, and Leaf Springs for a Boat Trailer
- Q&A: Axle Upgrade For Ironton 5 X 8 Utility Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement Hub and Bearings for 1989 Tracker Boat Trailer
- Article: How to Measure a Trailer Axle
- Q&A: Do you Have Smaller Wheels and Tires for My Teardrop Camper so I can Easily Store in Garage?
- Article: How to Measure a Boat Trailer Axle
- Q&A: What are the Dimensions of the CE Smith Front Hanger Bracket?
- Q&A: How to Choose Replacement Axle for Lowe's 5x8 Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Trailer Vibrates at Speeds Over 65 MPH, Should Tires Be Balanced
- Article: Trailer Lighting Requirements
- Article: Most Popular Wheel Bearings
- Article: How to Replace Trailer Leaf Springs in 5 Steps
Jon G.
10/27/2025
Hey Dwayne, how did things go with your 2K trailer axle after leaving out the washer? Your update could make it easier for others working with the same setup.