Can Weight Distribution Hitch Be Used On Trailer With large Toolbox On Tongue?
Updated 10/27/2025 | Published 03/22/2025
Products Featured in This Question
Question:
I have the 2024 Ember 240 tkr. It has a tool/LP box on the tongue which uses up most of the tongue space for a sway bar system . Will this Curt set up work for me?
asked by: Alexa C
Expert Reply:
Hello Alexa, thanks for reaching out. Hard to say for sure without looking at the trailer tongue. The frame brackets for the Curt TruTrack Weight Distribution System # C17501 must be placed about 30" back from the center of the hitch ball so you can measure out the tongue and see if there is open space in this location. If most of the tongue is taken up by the toolbox, you probably would not have room but please verify.
With those bigger toolboxes, sometimes you can have risers welded to the bottom with cutouts for the WD frame brackets.
There are other options for sway control like the electronic Curt True Course # C94VV, or a Curt Friction Sway Control # 17200.
(click to enlarge)
Product Page this Question was Asked From
Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 15,000 lbs GTW, 1,500 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Trunnion Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- Top-Mount
- Fits 2 Inch Hitch
- Allows Backing Up
- 1100 lbs
- 1200 lbs
- 1300 lbs
- 1400 lbs
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Comparing the Andersen Weight Distribution Systems To Friction Bar Systems
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Is There 2.5 inch Shank That Can be Used with Curt 20 TruTrack WD System
- Q&A: Will Curt Hitch C47HR Obstruct Kick Sensor On 2025 Subaru Forester?
- Q&A: Can Trailer with V-Nose Use Weight Distribution System
- Q&A: Will Equal-i-zer Weight Distribution Brackets Sit Low Enough for Generator Box Door Clearance
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Differences Between The Curt TruTrack Weight Distribution Hitches # C17499 And # C17501
- Q&A: Best Option For Replacing Ole Carson CP-10FK-2 Power Pack Converter
- Article: Top Weight Distribution Hitches for a Buttery Smooth Ride
- Article: Determining Trailer Tongue Weight
- Article: How to Measure for Trailer Hitch Drop
- Article: Best Hitches for Travel Trailers (2022) - For a Smooth, Sway-Free Ride
- Article: Ram Trailer Tow Prep Package
Jesse M.
10/27/2025
Hey Alexa, what did you find when you measured the tongue space on your Ember 240 TKR for the Curt TruTrack system? Once you checked that distance, were you able to see if the brackets would fit around the toolbox? Your update could make it easier for others with the same setup.