Spring Bolt Hole Separation For 2" Slipper Spring Equalizer in Kit # AP216
Published 10/29/2021
Question:
On AP216, can you tell me the distance from spring bolt hole to spring bolt hole. My existing is around 11.75
asked by: Steve W
0
Expert Reply:
The equalizer in the Tandem-Axle Trailer Equalizer Kit # AP216 is 11-1/2" on center from the outer spring mounting holes when measuring horizontal separation. One hole will be 6" on center from the equalizer mounting hole center and the other is 5-1/2" on center from the equalizer mounting hole center. I have included an image that will help you see the measurements for this.
expert reply by:
Bud M
0
Spring Mount Dimensions For Equalizer Kit # AP216
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Trailer Suspension Parts
- Standard Equalizer
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- 13-1/8 Inch Long
- Tandem Axle
- Dexter
more information >
Continue Researching
- Shop: Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Search Results: standard equalizer trailer suspension parts
- Q&A: 12" Equalizer Kit for Trailer Leaf Springs
- Video: The Low-Down on the Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs
- Shop: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long
- Shop: Equalizer for 2" Wide Slipper Springs - 12" Long - 7/8" Center Hole
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7-1/16" Long U-Bolts
- Q&A: Can Shackle Straps Be Used On Both Sides Of The Leaf Springs
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Search Results: torsion axle
- Search Results: emergency brake battery
- Search Results: e5115 spring
- Search Results: trailer suspension parts
- Search Results: 166079
- Search Results: 9/16 lugnut
- Shop: Wet Equalizer Bolt with Castle Nut and Grease Zerk - 4-11/16" Long - 7/8" Diameter
- Q&A: Tabs Added To Trailer Frame To Restrict Travel Of Slipper Spring Equalizers
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Video: Equalizer for 2" Wide Slipper Springs: The Breakdown
- Q&A: Recommended Replacement Equalizer Kit for a 3,500 lb Equalizer Kit
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Video: All You Need to Know About the Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs
- Q&A: Do You Offer a 13-1/8" Long Equalizer for 2" Slipper Springs Without any Hardware?
- Video: Review of EMCO Trailer Leaf Springs - 7 Leaf Slipper Spring Hook End 8000 lb Trailer Axle - EM53AJ
- Video: Feature Review Two Piece Nylon Bushing
- Article: Slipper Spring Trailer Suspension System Review
- Article: Trailer Maintenance Schedule
- Video: The Low-Down on the Mounting Bolts and Hardware for 12" Brake Assemblies
- Q&A: Replacement For 11-1/2" Slipper Spring Equalizer