Will Curt Hitch Fit a 2020 BMW 3 Series

Question

Question:

So if the Stealth Hitch SH34VR is compatible in both 2018 and 2020 3 series models. Why is the Curt C11367 only compatible with the 2018 3 series? Lower Bumper lip?

asked by: Henry

0

Expert Reply:

Hey Henry, thanks for reaching out!

We add hitch fits as the manufacturers confirm they fit, so Curt just hasn't confirmed that the Curt Trailer Hitch Receiver # C11367 will fit your 2020 BMW 3 Series.

I see that you recently purchased this hitch though, are you trying to get it to fit? What problems are you running into?

expert reply by: Jon G

0

Henry

3/8/2025

I bought one for my 2018 3 series for my bike rack and it works great. Now my friend wants one for his 2020 3 series! Asking for him.

Jon G.

3/10/2025

@Henry Well I'm glad to hear you're happy with the Curt! Yeah, I unfortunately just don't have a way to confirm if the Curt will fit the 2020 model or not. I definitely see your logic, but sometimes there is just enough of a variance in the hitch design that keeps on from fitting the other. For example, the part of the mounting bracket that fits up against the vehicle is much smaller on the Stealth Hitches # SH34VR than it is for the Curt # C11367 so that could definitely be a contributing factor.

Answer 1

There actually aren't any options for the Gran Coupe models, unfortunately. I do still have an option for you to carry your bikes. Check out the SeaSucker Mini Bomber Bike Rack for 2 Bikes #298-BM2006. This bike rack uses vacuum cups to stick to…

view full answer...

Answer 2

We do have one potential option for you, but I am sorry to say that there is not an aftermarket hitch available for the 2023 BMW 4 Series 440 Convertible. Nor are there any trunk mount bike racks that will fit. Considering the design of the rear of…

view full answer...

Answer 3

I have the install instructions for the Stealth Hitches Hidden Rack Receiver #SH34VR included below as well as an install video we have for you to check out. This will have no issues fitting your 2022 BMW 330i, but it can only be used for bike racks,…

view full answer...

Answer 4

The best source for information on whether or not your 2016 BMW 328ix Gran Tourismo can tow this trailer is going to be the owner's manual; the Curt #C11367 has a capacity of 2000-lbs towing/ 200-lbs tongue weight, so it will handle a load that…

view full answer...

Answer 5

The ideal height will actually have to do with how tall the coupler of the trailer is from the ground. The Draw-Tite #76020 will sit at 13 1/2 inches from the ground to the top of the hitch when installed on a 2016 Mazda CX-9. From what I could find…

view full answer...

Answer 6

When we installed the Curt Class I hitch #C11367 on a 2014 BMW 4-Series coupe we found that the height of receiver opening was 11-inches above ground level. This is shown in both the linked photo and installation video. Since there are two stock…

view full answer...

Answer 7

There are situations where if you are installing a trailer hitch you would not need wiring to go with it. So if you were installing the Curt hitch part #C11367 on your 2015 BMW 228i and only planned on carrying bike racks or cargo carriers…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Will Curt Hitch Fit a 2020 BMW 3 Series

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching