Replacement Idler Hub for Trailer
Updated 10/27/2025 | Published 02/27/2025
Products Featured in This Question
Question:
I need hub for a 5 lug x 4.5inch for a tapered spindle 1-1/16 to 1-3/8. The race is a L44610. I believe the other race is L68111. I do not have a brake on this.
asked by: Jonathan
Expert Reply:
Hey Jonathan! Based on your measurements and those races I'm sure you have a #84 spindle found on your standard 3,500 lb axle. For a replacement you can use the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles # AKIHUB-545-35-EZ-K. This uses # L68149 inner and # L44649 outer bearings with the same races you have now. It also has a 5 on 4-1/2 bolt pattern.
(click to enlarge)
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Correct Hub for Dexter EZ Lube 3,500-lb Axle
- Q&A: Replacement Idler Hub for a Dexter 3,500 lbs Axle
- Q&A: Replacement Hub for Tie Down Engineering 11033
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Is Drilling Required For Installation Of Roadmaster Front Anti-Sway Bar on 2026 Jayco Melbourne 24L
- Q&A: Replacement Hub Assembly for T.D.E. 11033
- Q&A: Best Replacement for a Wesbar Tail Light 271594
- Q&A: Dimensions Of P&F Products Interlocking Flooring for Enclosed Trailers - Aluminum PF35FR
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: 7 Common Questions Everyone Has About Trailer Tires
Robin H.
10/27/2025
Hey Jonathan, how did the Easy Grease trailer hub work out on your 3,500 lb axle? Knowing how the fit turned out could help others matching hubs to a similar spindle setup.