bing tracking image
Q & A Icon

Will 39x25 Inno Quick Base Cargo Carrier Fit 2024 Tesla Model Y  

Updated 10/30/2025 | Published 02/19/2025

Question:

Hey! Was wondering if the inno inh10 quick lock base is fully compatible with a Tesla model Y 2024. I know it’s a 2 inch receiver so that’s good, but I know it’s limited space on the hitch receiver on the Tesla so wondering if there are any issues with the pin or anything like that. Also I would be installing the bigger size box on the base. Thank you very much in advance!

0

Expert Reply:

Hey Gary! To find out if the 39x25 Inno Quick Base Cargo Carrier # IN92RR will fit your 2024 Tesla Model Y you will have to measure. The carrier requires at least 4-1/2" from the center of the hitch pin hole to the back of the vehicle/bumper for clearance. You also need 1-1/2" from the center of the hitch pin hole to the opening on the receiver and 2" around the hitch pin hole for the knob as seen in the attached picture.

As long as you meet these requirements you will be able to use the carrier along with the 39x25 Inno Cargo Box # IN32RR or 44x28 Inno Portable Cargo Box # IN72RR. If you have any additional questions don't hesitate to reach out in the comments below.

expert reply by:
0
Robin H
Inno Quick Base Fitment
Inno Quick Base Fitment
(click to enlarge)
Robin H. profile picture

Robin H.

10/30/2025

Hey Gary, were you able to check the clearance on your Model Y for the Inno Quick Base Cargo Carrier? I'm curious if the space around the hitch pin worked out with the larger box attached. Your update could make it easier for others setting up the same combo.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>