Can I Install the Hellwig Rear Anti-Sway Bar on My 2019 GMC Sierra Limited 4x4 with 2" Lift?

Question

Question:

I put coil over shocks in rear to help with sag under load. It lifted rear an inch or 2 tops. Will that affect this fit/installation? 2019 GMC Sierra limited 4x4 2014-18 style. Front leveled too. Thanks

asked by: Russ G

0

Expert Reply:

Hello Russ,

No, having the it lifted no more than 2" will not effect the fitment of the Hellwig Adjustable Rear Anti-Sway Bar - 1-1/8" Diameter # HE43GR, which is a great fit for your 2019 GMC Sierra limited 4x4. The bar is designed to accommodate a range of ride heights typical for stock and slightly lifted trucks.

Once you get the new sway bar installed, please let me know how you like it.

expert reply by: Kate F

0

Russ G.

1/17/2025

?? ty

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 3

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 4

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Hello Graham, thanks for reaching out. So far I have been pretty impressed with the PacBrake air bags. I would say they are in line with the quality of the Air Lift air bags. They use similar top plates. Pretty much everything about the design of…

view full answer...

Answer 7

Thanks for reaching out Jason. Yes, the shank (drawbar) included with the Weigh Safe True Tow Weight Distribution Hitch #WS26WR can be installed in either the drop or rise position. I've included a screenshot from the installation instructions…

view full answer...

Answer 8

When the SumoSprings Solo Custom Helper Springs item #SS65FR are installed on your 2020 GMC Sierra 1500 you will have a 1/2" - 1" of clearance with no additional cargo weight. This allows for you to have a comfortable ride when you are…

view full answer...

Answer 9

The Solera Power Awning Switch Kit #LC285500 does have 6 pins on the back of it, the included harness just has two internal jumper wires running between a few of the pins making it so there are only four wires. Since your switch has 6 individual…

view full answer...

Answer 10

Hey Gary, welcome back! The Safe-T-Plus #ST88MR is spring-based and reactive, so it corrects steering after you start to drift. It’s simple, solid, and proven. The steering will be firmer with this system installed, so if that is what you prefer I…

view full answer...

Can I Install the Hellwig Rear Anti-Sway Bar on My 2019 GMC Sierra Limited 4x4 with 2" Lift?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching