Recommended Torque Specs for Lug Nuts on a Jayco Pinnacle 5th Wheel Trailer

Question

Question:

What is the correct nut torque for my 16k fifth wheel with 7k dexter axles for both steel AND aluminum wheels? Thanks, Art

asked by: Art H

0

Expert Reply:

Hey Art! I pulled a table from the Jayco Pinnacle manual that I have attached below. The answer to your question is going to be either 70 ft lbs or 120 ft lbs for both style wheels depending on your lug pattern.

expert reply by: Jerred H

0

Jayco Pinnacle
(click to enlarge)

Art

1/15/2025

Thank you!

Jerred H.

1/15/2025

@Art You're welcome!

Answer 1

Yes, both special trailer (ST) and light truck (LT) tires can be used on a 5th wheel trailer. They are actually the only two types of tires rated for this use. The reason for this is that tires on a trailer will be subjected to much harsher…

view full answer...

Answer 2

Hello Charles, Yes there is, you can use the Replacement Head and Base Assembly for Demco Autoslide 5th Wheel Trailer Hitches - 21K #DM6107 with the Demco Autoslide Locking Plate for Lippert Helux Pin Boxes #DM53KV so you can attach it to your Helux…

view full answer...

Answer 3

The recommendation for the 10" diameter lube plate on a B&W Companion 5th Wheel Trailer has come from the manufacturer of the fifth wheel hitch, B&W. The Lube Plate for Reese 5th Wheel Trailer Hitches part #RP83002 will work just fine…

view full answer...

Answer 4

The head of the B&W Companion OEM 5th-Wheel Hitch item #BWRVK3300 is 13" in diameter. You will want to use the Reese Lube Plate 12" Diameter item #RP83001. This 12 inch diameter plate works great on higher capacity hitches like your…

view full answer...

Answer 5

The best auto sliding 5th wheel hitch for your 2021 GMC Sierra is going to be the Demco Autoslide 5th Wheel Hitch w/ Slider item #DM29GV. This hitch has a 21,000 lbs capacity and is designed specifically for GM trucks with the factory puck system.…

view full answer...

Answer 6

Hey Bob, thanks for reaching out. We do have pins that will work with the etrailer Adjustable 2-Ball Mount #e66PR. There is not a direct replacement for the pins available, but you can use the Replacement Pins and Clips for Curt Adjustable Channel…

view full answer...

Answer 7

You can use the Timken Grease and Oil Seal #TMK98ZR in place of the Grease Seal #GS-2250DL. While they are not exactly the same seal construction it is still a double lip design and the dimensions are the same so they are going to fit correctly.

view full answer...

Answer 8

The Dexter part number 023-357-00 is a 12x2 electric brake assembly. The correct RH assembly to use to replace what you have would be the part #23-459 and for the LH assembly you would want the part #23-458 if you have 6K axles. If you have 7k axles…

view full answer...

Answer 9

Hi Lou! There is absolutely no problems installing the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs - Rear Axle #F2703 with an existing B&W Turnoverball gooseneck hitch in your 2012 Ford F-250. This kit was actually specifically…

view full answer...

Answer 10

The Kwikee part number 903209000 comes up as a 32 Series step so the Kwikee Electric RV Step Complete Assembly - Double - 32 Series - 24" Wide #LC372261 would be the correct replacement and it comes with the whole setup to completely replace…

view full answer...

Answer 11

Hello Brian, thanks for reaching out. We can provide the brakes and hubs for the 7,000 lb axles, but I am sorry to say we do not offer an axle that matches your specs. That said, here are the brakes and hubs you can use: - etrailer Electric Trailer…

view full answer...

Answer 12

Hi Hector; to get that higher speed rating you will need to move up to a 12" tire. The only potential issue is the loss of clearance when compared to your current tires. If you have a 4 on 4 bolt pattern you can use the #AM35351DX and for 5 on…

view full answer...

Recommended Torque Specs for Lug Nuts on a Jayco Pinnacle 5th Wheel Trailer

Product Page this Question was Asked From

Continue Researching