Does Fastway Spring Bar Replacement # FA92-02-1299 Come with Trunnions

Question

Question:

I ordered the 1200 lb. Bars FA92-02-1299. I did this over the phone. I was looking at the pictures and video and I see just a straight bar. Does it come with the end that connects the bar to the hitch ? I should hope so. If not what do I do ? I’m upgrading from the 1000 to these 1200. Would I be able to use that part off of the ones that I have ? I sure hope that these come ready to install. Please let me know. Thanks

asked by: Ken

0

Expert Reply:

Hey Ken, the Fastway spring bars part # FA92-02-1299 that you referenced does not come with trunnions like you are asking about. Since you are upgrading to a higher rated spring bar you would need those as well too with the part # FA92-02-1244. This is because the spring bars are different dimensions.

expert reply by: Jameson C

0

Jameson C.

11/3/2025

Hey Ken, did the new 1,200 lb Fastway spring bars and trunnions work out for your upgrade? It’d be great to know if the fit matched what you needed. Your update could make it easier for others moving up from the 1,000 lb setup.

Ken

11/3/2025

@JamesonC They worked as expected. The 1000 and the 1200 fit exactly the same

Jameson C.

11/3/2025

@Ken Awesome! Can you feel the increased spring bar tension?

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 3

Hey Rex! Those are some great questions. A weight distribution hitch (WDH) isn't always needed but in your case you will want one. Typically if the weight of your trailer is more than 50% of the weight of your vehicle it is a good idea to use a…

view full answer...

Answer 4

Hello Danny, I’m really glad you mentioned the Equalizer! When sway is the issue, that one and the Weigh Safe are definitely my go-to options. They both have 4 point sway control, with straight spring bars and frame brackets. They can be a little…

view full answer...

Answer 5

The Equalizer Weight Distribution system part #EQ37120ET does allow you to back up without having to disconnect anything. As long as you aren't jackknifing the trailer this system can be backed up without any issues. If you did need to make some…

view full answer...

Answer 6

The Equil-i-zer Weight Distribution with 4-Point Sway Control, like #EQ37041ET, differs from the Fastway e2 Weight Distribution with 2-Point Sway Control #FA92-00-0450, because it does utilize 2 more points of steel-on-steel friction at the head of…

view full answer...

Answer 7

According to Cruisemaster, the DO35 can be used with load distribution hitches (WDH) providing the coupling movement is not obstructed and the maximum downward load of 350kg is not exceeded. Looking at their instructions you will have to get an…

view full answer...

Answer 8

When changing the spring bar rating of a Fastway e2 weight distribution system like you are wanting to do with the part #FA92-01-1299 you do not have to change to a different head. So all you need is the upgraded spring bars and you'd be set.

view full answer...

Answer 9

Hi Claude; without any identifying information the best thing you can do is measure and compare. I was able to find a few pictures on the KZ site and it looks like the Global Link Locking Baggage Lock #GL34FR you were looking at might be the right…

view full answer...

Does Fastway Spring Bar Replacement # FA92-02-1299 Come with Trunnions

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching