Can Weight Distribution Hitch Be Used With Cruisemaster DO35

Question

Question:

Hello. Im buying a 15 3500gvwr trailer and am curious about weight distribution / sway bar for towing with my 23 4Runner. The trailer will have a Cruisemaster DO35 articulating hitch which seems to add a wrinkle to the process. Any advice is appreciated. Thank you

asked by: Michael W

0

Expert Reply:

According to Cruisemaster, the DO35 can be used with load distribution hitches (WDH) providing the coupling movement is not obstructed and the maximum downward load of 350kg is not exceeded. Looking at their instructions you will have to get an adapter that is designed for a Hayman Reese Classic weight distribution hitch which comes from Australia. If you wanted to use a different brand like the Equal-i-zer # EQ37041ET you looked at you will have to reach out to Cruisemaster to see it is possible.

expert reply by: Robin H

0

Answer 1

We do not carry an exact replacement unit for the MaxxAir Deluxe 8951K. We have the Smoke #MA00-07500K or White #MA00-07000K which would be the closest replacement. These fans use the same lift and fan motors but the control panels and circuit boards…

view full answer...

Answer 2

According to Ram the 2016 Power Wagon has a towing capacity of 9,800 pounds. The trailer you choose cannot weigh more than this when loaded and ready to tow. If it is a Laramie Power Wagon it is rated for a max of 12,450 pounds. And if it is a…

view full answer...

Answer 3

I reached out to my contact at Timbren and the Timbren Suspension Enhancement System #TDRTT3500E you were looking at is indeed a confirmed fit for your 2017 Ram 2500 Power Wagon. This kit provides 8000lbs of load leveling support to keep your truck…

view full answer...

Answer 4

For your electric jack, there are only three possible explanations for your jack not working with a charged battery. Either power is not getting to your motor, your motor is bad, or your ground connection isn't working properly. To test power,…

view full answer...

Answer 5

I spoke with Lippert about the Replacement 18:1 Tuson Motor for Lippert Through-Frame Slide-outs part #LC125802 and they stated that they do not provide any installation instructions for the motor as this task is performed on the OEM side. They also…

view full answer...

Answer 6

The correct weight distribution system for your 2015 Chevrolet Equinox and Sunset Park Sun-Lite 16BH is going to need to be based off of the total tongue weight. The total tongue weight is calculated by adding the loaded ready to tow tongue weight of…

view full answer...

Answer 7

There is but It depends on how heavy your motorcycle is. We have the Erickson Motorcycle Carrier item #EM65MJ which has a 500 lbs capacity. However, to haul a motorcycle and pull a trailer at the same time you'll have to use the Curt Multipurpose…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hey Tony, as long as the tongue weight of 946 lbs that you listed is the loaded weight then yes the part #EQ90-00-1000 would be correct and a really great option. If that was also a dry weight you'd instead want to upgrade with the part…

view full answer...

Answer 10

Yes, the Equal-i-zer OnTarget Laser Measuring Tool #EQ37FR can be used to determine if your 5th wheel trailer is level. There is a mode you can use to make sure your trailer frame is level. This mode is different than the weight distribution mode so…

view full answer...

Answer 11

While the Equal-i-zer Weight Distribution System #EQ37100ET does make a lot of noise they do offer some products to help keep the noise down. First you want to use the Equal-i-zer High-Performance Lubricant #EQ91-00-4250 on the lubrication points…

view full answer...

Can Weight Distribution Hitch Be Used With Cruisemaster DO35

Continue Researching