Are There Extensions for the CE Smith Roller-Style Guide-Ons for Boat Trailers

Question

Question:

Hi! We installed the CE Smith Roller-Style Guide-Ons for Boat Trailers - 15 Tall - 1 Pair Part Number: CE27610 about a year+ ago. Wondering if there are extenders that can be added. We found that it is difficult for us to line up our boat since we really cant see the posts in the water. Thought if these were taller, we would get our boat out of the water quicker.

asked by: Vickie A

0

Expert Reply:

Hey Vickie, thanks for reaching out!

I have an alternative solution for you, but the CE Smith Roller-Style Guide-Ons for Boat Trailers # CE27610 don't have an extension. What you can do instead is also install the CE Smith Post-Style Guide-Ons # CE27626 so you'll have your rollers making contact with your boat, but then these uprights to help make sure you can see the guides above the water.

expert reply by: Jon G

0

Jon G.

11/17/2025

Hey Vickie, how did things go after adding the CE Smith post-style guide-ons with your roller guides? Did the taller posts make it easier to see and line up your boat at the ramp? Your update could make it easier for others with the same setup.

Answer 1

The CE Smith Roller Style Guide-Ons for Pontoon Boat Trailers part #CE27672 will work out great with your trailer frame size of 2" x 3". As far as the space they take up you will be fine in the back with minimal clearance but the front will…

view full answer...

Answer 2

I can help you figure out which Guide-On Covers are right for you. Both camouflage covers fit on 2 inch Schedule 40 PVC post-style guide-ons, with or without LED lights, with a maximum outer diameter of post: 2-3/8 inches. It would just depend on how…

view full answer...

Answer 3

The padded covers we have for the 40" Post-Style Guide-Ons #CE27626 you purchased can be found as part #CE27902 for 36" tall pads. If you want to upgrade to 60" tall guide-ons you can do so with part #CE11354 which comes in a quantity…

view full answer...

Answer 4

The CE Smith Roller-Style Guide-Ons for Boat Trailers #CE27610 measure 17-1/2 inches horizontally. It mounts on 3 inch frames and roughly 3 inches of it is a portion which cannot be adjusted to so you will have approximately 11-1/2 inches that you…

view full answer...

Answer 5

Though we do not have an option that would have a perfect 90 degree angle, I may still have something that would work. The CE Smith #CE27610 is a little smaller and typically installed on the outside of a trailer frame, but can be used however…

view full answer...

Answer 6

Hello Dan, Great question, and to be honest I was not sure of the answer, so I reached out to my friend Carol at CE Smith. This was Carol's response about the holes on the CE Smith Roller-Style Guide-Ons for Boat Trailers - 15" Tall - 1 Pair…

view full answer...

Answer 7

Hey Steve, you can trim down the Tie Down Modular Marine Glide Ons for Boat Trailer Bunks like part #TD69FR so what I would do is use the curved end piece for the transition section onto the bunks like you mentioned and then trim down the opposite…

view full answer...

Answer 8

Sounds like you are referring to guide on rollers like the CE Smith Roller-Style Guide-Ons for Boat Trailers #CE27610. These mount at the rear of the trailer frame and act as a guide to allow the boat to slide on as easy as possible. I attached a…

view full answer...

Answer 9

Hey Chris, thanks for reaching out, and nice boat! Based on what you are describing, I'd go with the bunk-style guide-ons. Since you usually aren't power loading, the bunks will help catch the hull and keep it centered. Plus, the bunks help…

view full answer...

Answer 10

The CE Smith Keel Roller for Boat Trailers - Self Centering #CE29505 is a replacement roller for a keel roller assembly. This self-centering roller fits a 12" wide bracket with a 5/8" shaft. In order to use this on your boat trailer you…

view full answer...

Are There Extensions for the CE Smith Roller-Style Guide-Ons for Boat Trailers

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching