Replacement Hub Caps For Yakima Rack And Roll Trailer Wheels

Question

Question:

Do this hub caps work on wheels part Y08121?

asked by: Charles E

1

Y08121
(click to enlarge)

Helpful Expert Reply:

Hey Charles,

Yes, the Replacement Hub Caps for Yakima Rack and Roll Trailer Wheels # Y8880165 would be the correct fit for your Yakima Rack and Roll trailer wheels # Y08121.

expert reply by: Kevin C

1

Jameson C.

12/15/2025

Hey Charles, how did the fit turn out with the replacement hub caps on your Yakima Rack and Roll trailer wheels? Knowing what worked might help someone else with the same setup.

Answer 1

After the main plate of the Yakima Replacement Mounting Hardware Kit for Yakima 5 Spoke Spare Tire Carrie part #8880317 has been installed on the trailer the long bolt goes through the tire and secured to the main plate. The main plate it threaded…

view full answer...

Answer 2

Rene, the speed rating on the Yakima Rack and Roll Trailer #Y08106 is 94 MPH but it is not recommended to go that fast with the trailer, we'd recommend sticking to a 65 MPH maximum to be safe.

view full answer...

Answer 3

Hey Larry! With the exception of their USA made cargo boxes, everything from Yakima is manufactured in China or Taiwan. They wouldn't give me the specifics for the Yakima LowRider Kayak Trailer #Y82QD or #Y82KD so all I can say is it comes from…

view full answer...

Answer 4

Yes, the Replacement Hub Caps for Yakima Rack and Roll Trailer Wheels #Y8880165 will fit the original wheels that came on the Yakima Rack and Roll Trailer #Y08107 & the Yakima Rack and Roll Trailer #Y08106.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Replacement Hub Caps For Yakima Rack And Roll Trailer Wheels

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching