Can I Buy the M14 Washer for the Yakima Rock and Roll Separate, or do I Need the Whole Axle Kit?

Question

Question:

Do you sell the M14 washer for the rack n roll 66 axle bolt? I see the kit for the axle bolt assembly on the web site, but all I need is this washer.

asked by: Byron S

0

Expert Reply:

Hello Byron,

I really wish they sold the washer individually, but unfortunately they do not.

You would need to purchase the full kit, the Replacement Axle Bolt Kit for Yakima Rack and Roll Trailers # Y8880180. On the bright side, ordering the kit will give you a few extra spare parts to have on hand for the future, which can definitely come in handy.

What kind of watercraft are you hauling on your Rack and Roll? Do you have a specific body of water you mainly like to go out on? I spend a lot of my time fishing out at the Lake of the Ozarks and Mark Twain Lake here in Missouri.

expert reply by: Kate F

0

Axle Bolt Kit Installed
(click to enlarge)

Dave F.

3/10/2026

hi Bryan: You should be able to find a replacement washer at your better hardware stores. Or even an auto parts store. if you know the inside and outside diameter, it should be an easy find. Dave

Kate F.

3/11/2026

@DaveF I agree with you Dave, I am glad you mentioned this =)

Richard R.

3/13/2026

I replaced my axles with this kit. Ready to take them apart before a trip to Colorado from now Ohio in June. Good suggestions in this posting

Kate F.

3/16/2026

@RichardR Thanks for the response Richard! Safe travels =)

Byron S.

3/16/2026

Thanks for the help on this. This answers my questions. And thanks to all that responded.

Kate F.

3/17/2026

@ByronS The neighbors (customers) answering is a new thing we added to our site, I love the interaction like a forum, being able to hear that fist hand experience is nice! My pleasure Byron, if you ever have any questions down the road, you know where to find us!

Answer 1

After the main plate of the Yakima Replacement Mounting Hardware Kit for Yakima 5 Spoke Spare Tire Carrie part #8880317 has been installed on the trailer the long bolt goes through the tire and secured to the main plate. The main plate it threaded…

view full answer...

Answer 2

Hi Philip! The shocks on the Yakima Rack and Roll Trailer #Y08107 actually use a pin instead of a bolt. That is the Replacement Shock Pin for Yakima Rack and Roll Trailer #8880182. This has a 14mm diameter and has 4-1/2" of useable length. If…

view full answer...

Answer 3

Rene, the speed rating on the Yakima Rack and Roll Trailer #Y08106 is 94 MPH but it is not recommended to go that fast with the trailer, we'd recommend sticking to a 65 MPH maximum to be safe.

view full answer...

Answer 4

You can get a single replacement wheel for the Yakima Rack and Roll Trailer with part #Y08121, or #8880157 as a pair. The confirmed replacement axles, as you've already found, are part #Y8880180. However, there are not replacement bearings…

view full answer...

Answer 5

Hey Daniel, The Yakima Rack And Roll 78", #Y08107, is a great option for hauling your 2 kayaks. I went ahead and looked up the dry weight of your kayaks and they came out to around 221lbs for the both of them. I recommend you go with the…

view full answer...

Answer 6

The Replacement Shock Pin for Yakima Rack and Roll Trailer #8880182 measures 4-1/2 inches from the collar to the center of the pin hole. The measurement from the collar to the end of the pin is 4-15/16 inches. I've attached a photo with these…

view full answer...

Answer 7

According to Yakima, the Heavy Duty Shocks for Yakima Rack and Roll Trailer #Y08110 should only be used if you add the 78" crossmember kit #Y08111. They didn't have an exact reason for this, but it sounds like the concern is people will…

view full answer...

Answer 8

The Replacement Axle Bolt Kit for Yakima Rack and Roll Trailers #Y8880180 measures 9" long total and measures 7-7/16" from the bottom of the bolt head to top of the threads. It is also 14mm (0.55") in diameter. I have attached a…

view full answer...

Answer 9

I went out to the warehouse and pulled Replacement Axle Bolt Kit #Y8880180 to measure the cotter pin in the kit. The pin is approximately 0.11 inches thick whereas the hole is just slightly larger than 0.125 inches (1/8). The pin has an overall…

view full answer...

Answer 10

Hey Charles, Yes, the Replacement Hub Caps for Yakima Rack and Roll Trailer Wheels #Y8880165 would be the correct fit for your Yakima Rack and Roll trailer wheels #Y08121.

view full answer...

Answer 11

Hey Michael, The wheel for your Yakima Rack And Roll Kayak Trailer #Y08106 would be held in place with a single bolt. The bolt head would stick out past the wheel so you should be able to use another wrench to hold the bolt while you torque down the…

view full answer...

Answer 12

Hey Larry! With the exception of their USA made cargo boxes, everything from Yakima is manufactured in China or Taiwan. They wouldn't give me the specifics for the Yakima LowRider Kayak Trailer #Y82QD or #Y82KD so all I can say is it comes from…

view full answer...

Can I Buy the M14 Washer for the Yakima Rock and Roll Separate, or do I Need the Whole Axle Kit?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching