Info Needed to Pick Out Leaf Spring for Single Axle Trailer
Updated 11/25/2024 | Published 11/24/2024 >
Question:
Have a carolina Skiff 21DLX boat on a single axle trailer. The lief spring is 3 lief 22 from eye to eye but it is resting on the frame and when a bump is gone over, you hear it hit the frame of the trailer. The lief spring is flat, and stretched max. Need help getting the correct lief spring to absorb the bumps and prevent damage to the aluminum frame. Thank you.
asked by: Brian F
Expert Reply:
Hey Brian, we don't have any springs that are the ideal length based on what you listed but do you happen to know what the axle capacity is on the trailer? That would be a good place to start to come up with best option but you will most likely need to move some of the hangers.
Product Page this Question was Asked From
etrailer Rust-Resistant 4-Leaf Double Eye Spring for 3.5K Trailer Axles - 25-1/4" - Dacromet
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushing
- 3500 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 25-1/4 Inch Long
- Marine Grade
- etrailer
more information >
Continue Researching
- Video: Installation of the etrailer Trailer Axle 4-Leaf Double-Eye Spring on a Boat Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: What to Know About the etrailer Rust-Resistant 4-Leaf Double Eye Spring for 3.5K Trailer Axles
- Video: Review of CE Smith Trailer Suspension Parts - Shackle Bolts - CES25QR
- Search Results: trailer leaf springs
- Shop: etrailer Rust-Resistant 4-Leaf Double Eye Spring for 3.5K Trailer Axles - 25-1/4" - Dacromet
- Article: How to Tell the Weight Rating of a Trailer Axle
- Search Results: static/images/styles/checksvg
- Search Results: trailer safety chains
- Search Results: nylon bushing
- Search Results: leaf spring hardware
- Search Results: bushing
- Search Results: shackle bushing
- Shop: Lippert Replacement Standard Shackle Links - 2-1/4" Long - 0.224" Thick - Qty 4
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Shop: CE Smith Shackle Bolts with Lock Nuts - 3-1/2" Long - Qty 2
- Q&A: How to Determine the Distance for Mounting Trailer Spring Hangers on a Single Axle Trailer
- Shop: Lippert Replacement Heavy-Duty Shackle Links - 3-1/8" Long - 0.5" Thick - Qty 4
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: What Is A Leaf Spring? (Everything You Need to Know About Trailer Leaf Suspension)
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Shop: Lippert Complete Bearing Kit for 6,000-lb Trailer Axles - 15123/25580 Bearings, 15245/25520 Races
- Q&A: How to Identify Axles and Can Leaf Springs With Higher Capacity Be Installed
- Q&A: Upgraded Equalizer And Shackle Kit For 2021 Jayco 267BHS
- Q&A: Typical Trailer Suspension Hanger Spacing Relative to Leaf Spring Size
- Q&A: Recommended Shackle Straps and Hangers for a Single Axle Trailer
- Q&A: Converting 3,500 lb Torsion Axle to Spring Leaf Axle on Boat Trailer
- Q&A: Should Suspension Shackle Straps Angle Towards the Front or Rear of a Trailer


Brian F.
11/25/2024
3500lb single axle