Recommended Shackle Straps and Hangers for a Single Axle Trailer
Updated 03/04/2024 | Published 03/03/2024
Products Featured in This Question
Question:
I am ordering a pair of your e34SR leaf springs for my single axle 2-3/8 trailer. Which Hangers, Shackle straps and related bolts would I need to complete the project. I dont want to reuse any of the old hardware. Thanks.
asked by: Michael T
Expert Reply:
I would be happy to help but first you will want to take some measurements of the hangers and shackle straps you currently have to determine which ones you'll need. Longer or shorter on the shackle straps and hangers will change the ride height of your trailer.
The Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers item # K71-358-00 would work great with the 5-Leaf Double-Eye Spring item # e34SR you're purchasing. The included shackle straps have a length from center of bolt hole to center of bolt hole 3-1/8". It's important that you get ones as close to the same size or the exact same size as possible.
If you would like a specific recommendation please feel free to email me back with the dimensions of your shackle straps and your hangers. You can also leave them in the comments below. Hope to hear from you!
Michael T.
3/4/2024
Jerred, I didn't see where you recommended the hanger brackets/bolts that will attach the e34SR to the 2-3/8" axle. It looks like K71-258-00 is just the shackle. Thanks. Michael
Product Page this Question was Asked From
5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 6000 lbs
- 1-3/4 Inch Wide
- 5 Leaf
- 25-1/4 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Search Results: morryde xfactor
- Search Results: moryde
- Search Results: axle bump stop
- Search Results: military discounts
- Search Results: electric stabilizer
- Shop: Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers - Double Eye Springs
- Search Results: trailer suspension parts
- Video: An In-Depth Look at the MORryde X-Factor Crossmember for Standard Frame Hangers
- Shop: Dexter Single Axle Standard Duty Suspension Kit - Double Eye Springs
- Shop: Bronze Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long - Qty 1
- Shop: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long
- Q&A: Difference Between 3 and 4 Leaf Spring Stack for 3,500 Pound Axle
- Q&A: Should MORryde X-Factor Crossmember be in Front of or Behind Axle on Single Axle Trailer
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Video: Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers Review
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Shop: 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Shop: 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 25-1/4" Long
- Search Results: trailer leaf springs
- Video: Dexter Heavy Duty Suspension Upgrade Kit Installation - 2021 Grand Design Imagine Travel Trailer
- Video: Detailed Breakdown of the Step Wet Bolt for 1-3/4" Double Eye Springs
- Video: Installation Guide for the Dexter Bronze Bushings on a 2022 Grand Design Imagine Travel Trailer
- Video: Let’s Check Out the Dexter Bronze Bushings
- Q&A: 1992 Escort Single Axle Boat Trailer Bayliner Leaf Spring Bushing Replacement
- Q&A: Replacement Leaf Spring for 2021 Grand Design Imagine 3250BH
- Q&A: Replacement Leaf Springs for Cargo Mate Enclosed Trailer
- Q&A: Upgrading Leaf Springs on a Trailer with a 3500 Pound Axle
- Video: Detailed Breakdown of the Dexter Single Axle Heavy Duty Suspension Kit
- Shop: Suspension Enhancement
- Article: Slipper Spring Trailer Suspension System Review
on Trailer Leaf Springs
Michael T.
3/4/2024
Thank you Jerred. My shackle is 3-1/4" center of bolt hole to center of bolt hole so it looks like the 3-1/8" shackle will work fine.