Does the CE Smith Bearing Kit Come with a Washer

Question

Question:

Does this kit come with a washer

asked by: Juan R

0

Expert Reply:

Hey Juan,

The CE Smith Bearing Kit # CES94XR does not come with a washer.

We have a number of washer options that I'm linking for you to filter through, but if you let me know what you have I'd be more than happy to help you out further!

expert reply by: Jon G

0

Lazer S.

12/15/2025

Hey Juan, did you end up finding a washer that worked with your CE Smith bearing kit? Once you’ve got that sorted, your update could help others looking for the same setup.

Answer 1

Hey Conner, for your CE Smith Kayak Trailer part #CE48810 the correct replacement seal would be the part #10-9.

view full answer...

Answer 2

The CE Smith trailer #CE48870 that you referenced would use the bearings #L44649. If you ever needed a replacement hub you'd just need the part #CE13210.

view full answer...

Answer 3

Hey Todd! The CE Smith Multi Sport Plus Boat and Kayak Trailer item #CE48870 uses item #CE13311 hubs. The correct replacement grease seal is item #34823, which has a inner diameter of 1.249" and an outer diameter of 1.983". Let me know in…

view full answer...

Answer 4

The speed rating of the CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks #CE48870 is 65 mph due to the tires that are on it. If you needed to go faster than that you can swap the tires out to the part #TT48012C which is the same size but…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 10

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

Hi Calvin! All of the pre-greased hubs/drums, like the Terran Industries Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 4-1/2 #TX68VJ, come with bearings made overseas and are all basically the same quality. At least that I…

view full answer...

Does the CE Smith Bearing Kit Come with a Washer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching