CE Smith Multisport Trailer Wheel Bearing and Hub Replacement

Question

Question:

Hello, I am purchasing a used model of the above trailer and would like to get new bearings to install. Can you tell me what replacement bearing kit you sell for this? Thanks

asked by: Howard R

0

Expert Reply:

The CE Smith trailer # CE48870 that you referenced would use the bearings # L44649. If you ever needed a replacement hub you'd just need the part # CE13210.

expert reply by: Jameson C

0

Answer 1

Hey Todd! The CE Smith Multi Sport Plus Boat and Kayak Trailer item #CE48870 uses item #CE13311 hubs. The correct replacement grease seal is item #34823, which has a inner diameter of 1.249" and an outer diameter of 1.983". Let me know in…

view full answer...

Answer 2

Hey Conner, for your CE Smith Kayak Trailer part #CE48810 the correct replacement seal would be the part #10-9.

view full answer...

Answer 3

For mounting a 15" wheel on the CE Smith Trailer Idler Hub Assembly #CE13515 you will want to torque the wheel nuts to either 90-120ft-lbs on a steel wheel or 90-100ft-lbs on an aluminum wheel. I have included our a wheel torque chart below as…

view full answer...

Answer 4

Hey Dave, For your application I recommend picking up the Timken Replacement Bearing and Race Set - L44649 and L44610 #TMK23VR, and the Timken Grease and Oil Seal #TMK48ZR. We don't have a kit that has all of these parts together, which is why I…

view full answer...

Answer 5

The speed rating of the CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks #CE48870 is 65 mph due to the tires that are on it. If you needed to go faster than that you can swap the tires out to the part #TT48012C which is the same size but…

view full answer...

Answer 6

Really good question, and while either trailer will technically work for your 12 foot long Jon boat, the better option is going to be the longer CE Smith trailer: - CE Smith Multi Sport Plus Boat and Kayak Trailer with Bunks #CE48870 The #CE48870 is…

view full answer...

Answer 7

Since you are looking for a way to transport a kayak a much better solution for you would be a Yakima Rack and Roll trailer like part #Y08106 as this is rated for highway speeds. As always, exceeding posted speed limits is not recommended, especially…

view full answer...

Answer 8

Hey Juan, The CE Smith Bearing Kit #CES94XR does not come with a washer. We have a number of washer options that I'm linking for you to filter through, but if you let me know what you have I'd be more than happy to help you out further!

view full answer...

Answer 9

The speed rating of the CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks #CE48870 is 65 mph due to the tires that are on it. If you needed to go faster than that you can swap the tires out to the part #TT48012C which is the same size but…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

CE Smith Multisport Trailer Wheel Bearing and Hub Replacement

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching