Comparing Curt And Draw-Tite Trailer Hitches For A 2022 Subaru Impreza

Question

Question:

I have a 2022 Subaru Impreza hatchback. Looking for a Class 1 or 2 hitch to primarily be used for a bike rack. I was wondering which of the following two hitches would be better: Draw- trailer hitch or the Curt trailer hitch? My primary concern is ground clearance in the back. Which one will sit closer to my car? They will both accept a 1.25 bike rack correct?

asked by: Jamie B

0

Expert Reply:

Hey Jamie,

I do typically prefer Curt's quality over Draw-Tite, however Curt only has a class I hitch # C11465 whereas Draw-Tite has a class II hitch # 36644 that's going to have an increased capacity for the same cost as the Curt hitch. This would have a 3,500lb gross towing capacity (GTW) and 350lb tongue weight (TW) capacity instead of just a 2,000lb GTW and 200lb TW capacity. You'll still need to check your Impreza's towing capacity to ensure you're not exceeding what it can handle though in the event that you do end up towing a trailer.

The # 36644 has a 1-1/4" receiver tube opening so it would accept your bike rack's shank. If you want to add lights to a bike rack or cargo carrier then you'll also want the T-One Vehicle Wiring Harness # 118744 as well.

expert reply by: Kevin C

0

Jamie

11/13/2024

I believe my towing capacity for my Subaru Impreza 5 door wagon is 1,260 pounds (570 kg). Would the Curt trailer hitch be the best?

Kevin C.

11/13/2024

@Jamie I would still stick with the Draw-Tite # 36644. Tongue weight is the downward force on the hitch, which would be weight from your bike rack. Having a bit more tongue weight capacity will be more beneficial in the long run. The safety chain loops on the # 36644 are also a lot more open and accessible than the Curt. With them both being so close in price too the Draw-Tite is the clear winner in my opinion.

Jamie

11/13/2024

@KevinC Thank you. I appreciate the recommendation.

Answer 1

The main difference between the Curt Trailer Hitch Receiver part #C13382 and Draw-Tite Max-Frame Trailer Hitch Receiver part #76209 for a 2020 Subaru Crosstrek is that the Curt hitch has a hidden crosstube see photo one and the Draw-Tite hitch has a…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The Curt Class I Trailer Hitch Receiver #C11465, the Draw-Tite Class I Sportframe Trailer Hitch Receiver #DT24959, and Draw-Tite Class II Trailer Hitch Receiver #36644 are all within roughly a 1/4inch of ground clearance when installed on your 2018…

view full answer...

Answer 4

I checked with Draw-Tite and can confirm for you that the Draw-Tite Trailer Hitch #36644 you asked about will fit your 2019 Subaru Crosstrek hybrid. I attached an install video for this for you to check out as well.

view full answer...

Answer 5

The hidden design of the Curt hitch #C12184 is very appealing and since Draw-Tite actually doesn't have a hidden crosstube design for your 2020 Subaru Crosstrek I definitely recommend going with it over the Draw-Tite #36644. Curt has a great…

view full answer...

Answer 6

Yes, the Curt Trailer Hitch Receiver part #C12184 is a confirmed fit for your 2024 Subaru Crosstrek. It features a simply bolt-on install with hidden design for a sleek look. It will then work great with all your favorite accessories like bike racks…

view full answer...

Answer 7

Hey Rachel, few things here. First off, the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" #C12184 does indeed need the stabilizing strap #18050 on non-trailered loads like a bike rack to add in support. And to answer your other…

view full answer...

Answer 8

Using anti-seize compound on the hitch mounting bolts is not necessary. Because of the lubricant properties, you'd need to lower the torque specs in order to not over tighten the bolts. You would be better off installing the bolts dry and…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hello Mike, thanks for reaching out. We do offer a few different hitches for the 2026 Subaru Crosstrek, the Curt #C22MJ, the Draw-Tite #76209 and the EcoHitch #EH57CR. All 3 of these hitches place the receiver in virtually the same position beneath…

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Comparing Curt And Draw-Tite Trailer Hitches For A 2022 Subaru Impreza

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching