How to Identify Wood Mfg. Co Inc. Boat Trailer Spindle
Updated 12/15/2025 | Published 11/11/2024
Question:
I HAVE A 1995 WOOD MFG. CO INC. BOAT TRAILER. i AM LOOKING FOR 2 NEW AXLE SPINDLES. CAN YOU HELP MAKE SURE I GET THE RIGHT ONES? 18WRT1925T1D58906 VIN
asked by: Zach C
Expert Reply:
Hello Zach; I wish I had a way to identify your spindles using that VIN but it is not something we are capable of. The only way to figure out which replacement spindle you need is to pull the hubs and identify/measure the bearings or spindle. Check to see if part numbers are stamped into the sides of your bearings. If they are worn or missing, measure the inner diameter with a digital caliper # PTW80157. You can also measure the spindle where the bearings ride.
If you can send me this information I would be happy to help you find a replacement spindle. You will also need to know if it requires a brake flange. I went ahead and attached a link to all of our available spindles below for your reference.
(click to enlarge)
Product Page this Question was Asked From
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer bearings races seals caps
- Search Results: wobble roller boat trailer parts
- Search Results: trailer leaf springs
- Search Results: surge brake
- Shop: Grease Seal - Double Lip - I.D. 1.68" / O.D. 2.33" - UFP Axles Prior to 2004 - Qty 1
- Shop: Timken Replacement Trailer Wheel Bearing - L68149 - Qty 1
- Shop: Timken Bearing Kit for 3,500 lb Axles with #84 Spindle - Bearings L44649/L68149
- Search Results: bk2 100 bearing kit
- Shop: Yates Ribbed Wobble Roller - Heavy-Duty Rubber - 5" Diameter - 7/8" Shaft
- Video: Yates Ribbed Wobble Roller Review
- Shop: Trailer Wiring
- Search Results: leaf spring
- Search Results: trailer suspension parts
- Shop: Curt Trailer Breakaway Kit with Trickle Charger, LED Tester, and 5 Ah Lead Acid Battery - Side Load
- Shop: Replacement Wet Shoulder Bolt - Equa-Flex Tandem Axle Suspension - 9/16" x 3-3/8" - Qty 1
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: Measuring To Choose The Right Trailer Axle
- Shop: Brake Controller
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Choose the Right Trailer Hitch Class
on Hand Tools
Robin H.
12/15/2025
Hey Zach, were you able to measure your bearings or spindle with the digital caliper to find the right replacements? Once you had those sizes, did you end up locating spindles that matched your trailer? Your update could make it easier for others trying to replace older trailer spindles.