Do You Have Brakes and Hubs for My AL-KO 90-12 Hub for My 4,400 Pound Axle?
Updated 09/08/2025 | Published 06/12/2025
Products Featured in This Question
Question:
Looking for replacement hub and backplate for Al-Ko 90-12 10 hub 6 at 5.5 lugs , electric break 4,400 lbs axel.
asked by: David
Expert Reply:
Hello David,
The Trailer Hub and Drum Assembly - 4,400-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2 # 8-407-5UC3-EZ will work as a replacement just as long as it is not an AL-KO Axle, if it is an AL-KO axle we do not have a hub that will work.
For brakes you will want one of the following:
- If it is a Dexter axle manufactured prior to May 2009: # 23-454-455
- If it is manufactured after May 2009: # K23-478-479
If it is an AL-KO axle you will need to swap out the whole axle. If you can supply me with the hub face to hub face measurement, and spring center to spring center I am happy to see if we have an axle that will work for you. I attached some images to show exactly where to measure, needs to be precise.
What kind of trailer is this going?
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Dexter Electric Trailer Brakes - 12" - Left/Right Hand - 6K AL-KO/Hayes Axles
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 12 x 2 Inch Drum
- 6000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Trailer Wiring
- Shop: Brake Controller
- Q&A: Recommended Bearings for a AL-KO T44 Axle
- Shop: Trailer Hub and Drum Assembly - 4,400-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: How Do The D-Ring Tie-Down Anchors for C-Channels on Lets Go Aero Trailers Install?
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2019 Honda Odyssey
- Search Results: 2250dl
- Search Results: trailer hitch ball mount
- Shop: MaxxAir Standard RV and Trailer Roof Vent Cover - 20" x 19" x 9-1/2" - Black
- Search Results: trailer flags
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 6 on 5-1/2
- Search Results: 40007
- Shop: Off Road Lights
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Shop: MaxxAir Standard Roof Vent Cover - 20" x 19" x 9-1/2" - Translucent White
- Shop: Terran Industries Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 6 on 5-1/2
- Shop: Master Cylinder Rebuild Kit for Demco Kar Kaddy 3 with Drum Brakes and Demco Drum Brake Actuator
- Q&A: Replacement Hub For An AL-KO T44 3,500lb Axle With AL-KO 9012 Hubs
- Q&A: Does Trailer Hub # 8-407-5UC3-EZ Fit Dexter 4,400 lb Axle
- Q&A: Recommended Replacement Hub and Drum Assembly for Lippert 4,400 lb Axles
- Search Results: 7 pin trailer socket
- Search Results: bullet lights
- Search Results: 7 pin trailer plug
- Q&A: Availability of Replacement Hub for AL-KO 9012 Hub
- Q&A: Will Dexter Nev-R-Adjust Electric Brakes K23-478-479 Fit 2013 Keystone Laredo W/ 4400lb AL-KO Axles
Kate F.
9/8/2025
Hey David, Did you have a chance to check if your axle is an AL-KO or another brand? I'm here to help if you need more assistance with finding the right parts for your trailer.