Looking For 4 on 4 Hubs For Older Trailer With Short Spindles
Updated 12/15/2025 | Published 10/31/2024
Products Featured in This Question
Question:
Have a 4 bolt 4inch hub on a 1inch spindle but only 3inch of spindle length from seal shoulder to 1/2inch threaded necked down shoulder for castle nut please help. Need 4 hubs. Older trailer. Rob D
asked by: Rob D
(click to enlarge)
(click to enlarge)
Expert Reply:
Hello Rob, thanks for reaching out. We do offer some 4 on 4 hubs that will fit a 1" spindle, but we do not have anything for a short spindle like you described. A lot of older trailers used shorter spindles, and this design is not obsolete.
The only solution for this will be to replace the spindles with the BT8 Spindle for 2,000-lb Trailer Axles # TRU94FR. This is a 1" straight spindle and it is the standard length. You can use that with the Trailer Idler Hub Assembly # AKIHUB-440-2-G-1K which is the 4 on 4 bolt pattern. Keep in mind that the new spindles will need to be welded on and this is best done by a professional.
Product Page this Question was Asked From
Grease Cap, 1.988" OD Drive In - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 1.99 Inch O.D.
- 1.99 Inch
- 2000 lbs Axle
- 2200 lbs Axle
- 2500 lbs Axle
- 3000 lbs Axle
- 3500 lbs Axle
- TruRyde
more information >
Continue Researching
- Video: Review of etrailer Trailer Hubs and Drums - Galvanized Idler Hub - AKIHUB-440-2-G-1K
- Video: Detailed Breakdown of the Double Lip Grease Seal
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" Galvanized Wheel - 4 on 4 - Load Range B
- Shop: Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Q&A: Length Of BT8 Spindle Used With etrailer Easy Grease Trailer Idler Hub Assembly AKIHUB-440-2-EZ-1K
- Q&A: How to Determine Correct Replacement Trailer Hub for 1-1/4 Inch Diameter Spindle
- Q&A: Replacement Idler Hub Recommendation For Boat Trailer With 07100 Bearings
- Q&A: What Hub Do I Need For A Trailer With 4.80-4.00-8 Tires
- Q&A: Overall Length of Trailer Idler Hub Assembly for 2,000 lb Axles
- Q&A: How to Determine Which Replacement Hubs Will Fit Spindle
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Trailer Hitch
- Search Results: trailer tires and wheels
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: trailer hubs and drums
- Article: Trailer Tire Sizing
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Wiring
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Video: Measuring To Choose The Right Trailer Axle
- Shop: Brake Controller
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: spare tire mount
- Article: Trailer Wiring Diagrams
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Suspension Enhancement
- Search Results: trailer brakes
- Article: 7 Common Questions Everyone Has About Trailer Tires
on Trailer Bearings Races Seals Caps
Jesse M.
12/15/2025
Hey Rob, how did things go with the new BT8 spindles and 4 on 4 hubs for your older trailer? Your update could make it easier for others working with short spindles to find a good solution.